User manual CANON FAX-L290

[. . . ] If you have purchased the FAX-L290 model, be sure to read Appendix E before reading the rest of this guide. Appendix C describes important information exclusively for specified countries. If you find your country name in Appendix C, be sure to read it. This equipment conforms with the essential requirements of EC Directive 1999/5/EC. We declare that this product conforms with the EMC requirements of EC Directive 1999/5/EC at nominal mains input 230V, 50Hz although the rated input of the product is 200V240V, 50/60Hz. [. . . ] 3 Use or to select RESEND DOCUMENT. Special Features DOC. MEMORY LIST RESEND DOCUMENT Ex: 4 Press Set. 5 Use or to select the transaction number (TX/RX NO. ) of the document you want to send. If you are unsure of the transaction number (TX/RX NO. ), print the DOC. A "#" before the transaction number (TX/RX NO. ) indicates that that document is being sent or printed at that moment, and can therefore not be selected. Use or to display details of the transaction (e. g. destination). TX/RX NO. 0001 Ex: TX/RX NO. #5003 6 Press Set. SELECT LOCATIONS TEL= 7 Enter up to 125 fax numbers you want to send to using any of the following methods: One-touch speed dialling: Press the one-touch speed dialling button(s) you want. Coded speed dialling: Press Coded Dial, then use the numeric buttons to enter the twodigit code you want. Repeat for other codes. Be sure to press Coded Dial before each code. Ex: TEL=905 795 1111 Ex: Ex: A01 TEL=03 3758 2111 Chapter 9 Special Features 9-7 Regular dialling: Use the numeric buttons to enter the fax number you want, then press Set. Ex: TEL= 2 887 0166 n You can only enter one fax number this way. If you enter a wrong destination, press Clear, then enter the correct destination. To review the destinations entered, use or to scroll through the numbers. 8 Press Set to begin sending. To cancel sending once dialling has started, press Stop then T. Sending to all the destinations you specified in step 7 will be cancelled. (You cannot cancel only one destination. ) 9-8 Special Features Chapter 9 Deleting a Document Stored in Memory Follow this procedure to delete a document stored in memory: 1 Open the one-touch speed dial panel. 3 Use or to select DELETE DOCUMENT. Special Features DOC. MEMORY LIST DELETE DOCUMENT Ex: 4 Press Set. 5 Use or to select the transaction number (TX/RX NO. ) of the document you want to delete. If you are unsure of the transaction number (TX/RX NO. ), print the DOC. A "#" before the transaction number (TX/RX NO. ) indicates that that document is being sent at that moment. If you want to delete a document being sent, follow the instructions in the LCD. Use or to display details of the transaction (e. g. destination). TX/RX NO. 0001 Ex: TX/RX NO. #0003 6 Press Set. If you are deleting a document stored in the polling box (1 p. 9-12), enter the password that restricts access to the polling box settings, then press Set. OK TO DELETE? [. . . ] See Polling sending Polling box changing settings 9-15, 9-16 deleting settings 9-15, 9-16 scanning document into 9-15 setting up 9-12 to 9-14 POLLING BOX menu 14-3, 14-9 setting 9-12, 9-16 Polling receiving cancelling 9-12 polling another fax machine 9-10, 9-11 Polling sending changing polling box settings 9-15, 9-16 deleting polling box settings 9-15, 9-16 scanning document into polling box 9-15 setting up polling box 9-12 to 9-14 Power cord 2-2, 2-8 cut 13-22 supply, safety instructions 1-6 switch 2-8 PREFIX setting 3-9, 3-10 PRINT ERROR ONLY setting 14-5 PRINT WITH IMAGE setting 14-5 PRINTER SETTINGS menu 14-3, 14-8 Printing area 5-3 document in memory 9-6 document set for delayed sending 7-16 lists. See individual list names problems 13-18, 13-19 reports. See individual report names Problems cannot solve 13-21 copying 13-17 document 4-2 general 13-20 multipage document 4-3 paper feeding 13-13 printing 13-18, 13-19 receiving 13-15 to 13-17 receiving into memory when 8-11 sending 13-13 to 13-15 telephone 13-18 PSTN setting 3-9, 14-4 PSWD POLL REJECT message 13-11 PSWD TX REJECTED message 13-11 Pulse dialling setting for 3-8 switching temporarily to tone dialling 9-3 Q Quantity document 4-2 paper 5-2 R R button 2-12 registering 3-9, 3-10 REC'D IN MEMORY message 8-11, 13-12 Receive Mode button 2-12 Receiving. See also individual receive modes cancelling 8-11 in memory when problem occurs 8-11 methods 8-2 polling. [. . . ]