User manual CANON FAXPHONE 10 BROCHURE

[. . . ] d Insert the FINE Cartridge slightly slanted into the Cartridge Holder. Note The actual protective materials may differ in shape, quantity, and position from the ones shown in the illustration above. e Push up the FINE Cartridge until it clicks into place. b When the Printer Cover is opened, the Cartridge Holder will move to the left. b Connect the Handset to the jack, and place it in its cradle. There is a groove on the bottom of the machine to hold the handset cord. c Connect the telephone line and any necessary external device. For more details, see "Step 5" on the back of this sheet. Press [Start/Copy]. c Prepare the FINE Cartridge. DO NOT put the head of the FINE Cartridge downward into the Cartridge Holder. Remove the FINE Cartridge from its package. f Use [{] or [}] on the Operation Panel to select the language for the LCD, then press [Start/Copy]. f Close the Printer Cover. You can connect an external device (telephone or answering machine) if necessary. Connect the telephone line cord to the wall jack. Important Be sure to use supplied telephone line cable. Press [{] or [}] to select the language. Remove the protective tape. [. . . ] Remove the FINE Cartridge from its package. f Use [{] or [}] on the Operation Panel to select the language for the LCD, then press [Start/Copy]. f Close the Printer Cover. You can connect an external device (telephone or answering machine) if necessary. Connect the telephone line cord to the wall jack. Important Be sure to use supplied telephone line cable. Press [{] or [}] to select the language. Remove the protective tape. When doing so, DO NOT TOUCH the metallic areas. d Plug the power cord into the back of the machine and connect the other end to a power outlet. Wait until the preparation operation is completed: this takes about one to two minutes. DO NO TOUCH. Press [Start/Copy]. Turn Over For the instructions for Loading Paper, Setting RECEIVE Mode, Connecting the Machine, and Replacing the Cartridge. 3 Loading Paper a Open the Document Cover and extend the Paper Support to support the paper. 4 Setting RECEIVE Mode Press [Receive Mode/Resolution] to change the receive mode. For details on ANS. MACHINE MODE, refer to "Receiving Documents with an Answering Machine: ANS. MACHINE MODE" in "Receiving Faxes" of the User's Guide. For details on DRPD, refer to "Receiving with a DRPD (Distinctive Ring Pattern Detection) service: DRPD" in "Receiving Faxes" of the User's Guide. 5 Examples of Connecting the Machine Typical examples of connecting the machine are described below. The machine cannot send/receive faxes if the connection is incorrect. The following are examples of the type of connecting that can be made. Replacing the FINE Cartridge MANUAL Mode Pick up the Handset to answer the call. Connecting to the Telephone Line Connecting to an Analog Line b Squeeze, then slide the Paper Guide to the left. (A) (A) Telephone line (analog) Connecting to an ADSL Press [Start/Copy]. Rings for every call, regardless of whether the call is a fax call or a voice call. The fax receives documents automatically. To hear the recorded messages, press [Play]. Refer to "Playing Telephone Messages" in "Using TAM Mode" of the User's Guide. You may change the number of times the phone rings before the answering machine answers a call. Refer to "Setting TOLL SAVER" in "Using TAM Mode" of the User's Guide. If the LCD displays "TAM MEMORY FULL" when you turn the answering system on, please delete some of the messages stored in memory. Refer to "Deleting a Document from Memory" in "Receiving Faxes" of the User's Guide. (J) Telephone or Answering machine Take off the protective tape on the back of the machine when you connect an external device. Replace the FINE Cartridge. When the ink is empty, the LED blinks. [. . . ] Refer to "Setting TOLL SAVER" in "Using TAM Mode" of the User's Guide. If the LCD displays "TAM MEMORY FULL" when you turn the answering system on, please delete some of the messages stored in memory. Refer to "Deleting a Document from Memory" in "Receiving Faxes" of the User's Guide. (J) Telephone or Answering machine Take off the protective tape on the back of the machine when you connect an external device. Replace the FINE Cartridge. When the ink is empty, the LED blinks. [. . . ]