User manual CANON HF10

[. . . ] DIE-300 Instruction Manual Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] [2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer to the sidebar below. [ [ ] (Date print) Select [ON], [OFF] or [DEFAULT]. ] (Print Effect) Available only with printers compatible with the Image Optimize function. Canon inkjet/SELPHY DS printers: You can also select [VIVID], [NR] and [VIVID+NR]. [ ] (Number of Copies) Select 1-99 copies. NOTES Print setting options and [DEFAULT] settings vary depending on the printer model. For details, refer to the printer's instruction manual. Printing after Changing the Print Settings 1 2 If the joystick guide does not appear on screen, press to display it. The print settings menu appears. Printing multiple images on the same sheet [2-UP], [4-UP], etc. When using Canon printers you can print the same still image multiple times on the same sheet of paper. Use the following table as a guideline for the recommended number of copies depending on the [ PAPER SIZE] setting. [ PAPER SIZE] Canon printer Inkjet printers SELPHY DS SELPHY CP/ES 1 2 [CREDITCARD] [9 x 13 cm] [10 x 14. 8 cm] [A4] ­ 2, 4 or 82 ­ 2 or 4 2, 4, 9 or 161 2 or 4 4 ­ You can also use the special sticker sheets. With the [8-UP] setting, you can also use the special sticker sheets. SELPHY CP: When you use the wide-sized photo paper with the [DEFAULT] setting, you can also use [2-UP] or [4-UP]. 71 Photos Trimming settings ( 73) PRINT ERRORS If an error occurs while printing, an error message, for example [NO PAPER], will appear on the camcorder. Solve the problem referring to the error message list ( 106) and to the printer's instruction manual. · Canon's PictBridge-compatible printers: If printing does not resume automatically after you solved the problem, select [CONTINUE] and press to resume printing. If that option is not available, select [STOP] and press and then restart printing from the beginning. · Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection. Paper settings Current paper settings (paper size, paper type and page layout) Number of copies Print effect Date printing 3 4 5 In the print settings menu, select ( , ) the setting you want to change and press . Select ( ) the desired setting option and press . The print settings menu disappears when the printing is completed. · To continue printing, select ( ) another still image. IMPORTANT · You may not be able to print correctly with a PictBridge-compatible printer still images whose file names have been changed or that were recorded, created, edited or changed with any device other than this camcorder. · If [BUSY] does not disappear, disconnect the USB cable and restore the connection after a short while. TO CANCEL THE PRINTING 1 Press 2 Select ( while printing. ) [OK] and press . WHEN YOU HAVE FINISHED PRINTING Disconnect the cable from the camcorder and printer and turn off the camcorder. 72 Trimming Settings Set the paper size and page layout before changing the trimming settings. 5 1 Open the print settings menu. Refer to steps 1-2 in Printing after Changing the Print Settings ( 71). Press FUNC. [. . . ] Recordings made with the [PF25] frame rate are converted and recorded on the memory as 50i. Terminals AV OUT/ Terminal 3. 5 mm minijack; Output only (dual purpose terminal also for headphones stereo output) Video: 1 Vp-p / 75 ohms unbalanced Audio: ­10 dBV (47 kohm load) / 3 kohm or less mini-B, USB 2. 0 (Hi-Speed USB) Luminance (Y): 1 Vp-p / 75 ohms Chrominance (PB/PR (CB/CR)): ±350 mVp-p 1080i (D3) / 576i (D1) compatible HDMI mini, type C connector (19 pins); Output only 3. 5 mm stereo minijack ­57 dBV (with 600 ohm microphone) / 5 kohms or more USB Terminal COMPONENT OUT Terminal (Proprietary mini-D terminal) HDMI OUT Terminal MIC Terminal Power/Others Power supply (rated) Power consumption (SP mode, AF on) Operating temperature Dimensions (W x H x D) Weight (camcorder body only) 7. 4 V DC (battery pack), 8. 4 V DC (compact power adapter) 3. 9 W (LCD screen, normal brightness, recording in the built-in memory*) * 4. 0 W (LCD screen, normal brightness, recording on a memory card) 0 ­ 40 °C 73 x 64 x 129 mm excluding the grip belt 380 g only CA-570 Compact Power Adapter Power supply Rated output / consumption Operating temperature Dimensions Weight 100 ­ 240 V AC, 50/60 Hz 8. 4 V DC, 1. 5 A / 29 VA (100 V) ­ 39 VA (240 V) 0 ­ 40 °C 52 x 29 x 90 mm 135 g 120 BP-809 Battery Pack Battery type Rated voltage Operating temperature Battery capacity Dimensions Weight Rechargeable lithium ion battery, compatible with Intelligent System 7. 4 V DC 0 ­ 40 °C 890 mAh 30. 7 x 27. 5 x 40. 2 mm 47 g Weight and dimensions are approximate. Subject to change without notice. 121 Additional Information Index 25F progressive frame rate . 43 Aspect ratio of a connected TV (TV type) . 90 Autofocus (AF) AF frame (9-point AiAF/Center point) . [. . . ]