User manual CANON HR10

[. . . ] PUB. DIE-282A HD Camcorder Instruction Manual Please read also the Digital Video Software instruction manual (on PDF file). Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] ERASE ALL IMAGES Erasing Photos You can erase still images recorded on the memory card. Erasing a Single Image POINTS TO CHECK ( 23) FUNC. YES IMPORTANT Be careful when erasing images. Erased images cannot be recovered. NOTES Protected images on the memory card cannot be erased. 1 If the joystick guide does not appear on screen, press ( display it. ) to 2 Push the joystick ( ) toward . 3 Select ( ) [ERASE] and press ( ). 74 Additional Functions Additional Functions 1 If the joystick guide does not appear on screen, press ( display it. ) to 2 Push the joystick ( ) toward Flash You can use the built-in flash to record still images in dark places. The flash features the red-eye reduction function. · If does not appear on the joystick guide, repeatedly push the joystick ( ) toward [NEXT] to display it. · Repeatedly push the joystick ( ) toward to cycle between the flash modes. · The display disappears after 4 seconds. PHOTO , first halfway to activate the autofocus and then fully to record the still image. 3 Press Options (auto) Default value NOTES · The practical range of the flash is approx. The range depends on the recording conditions. · The range of the flash decreases in continuous shooting mode. · For red-eye reduction to be effective, the subject needs to look at the assist lamp. The degree of reduction depends on the distance and on each individual. · The flash will not fire in the following cases: - When you manually adjust the exposure in (auto) or (red-eye reduction) mode. - In the [ FIREWORKS] recording program. · The flash mode cannot be selected when the exposure is locked. · We recommend not using the flash while the optional Wide-converter is attached; its shadow can appear on the screen. · About the AF-Assist Lamp: While you press PHOTO halfway, if the subject is too dark the assist lamp may light up briefly The flash fires automatically according to the brightness of the subject. (red-eye reduction, auto) The flash fires automatically according to the brightness of the subject. The assist lamp lights up to reduce the red-eye effect. (flash off) The flash does not fire. NEXT 75 Photos in order to enable the camcorder to focus more accurately (AF-assist lamp). You can also set [AF AST LAMP] to [ OFF] so the assist lamp does not light up ( 46). [. . . ] 2, 960, 000 pixels Effective pixels: Movies (16:9): approx. 2, 070, 000 Still images (L, M, S): approx. 2, 760, 000 2. 7 in. , wide, TFT color, approx. 211, 000 pixels 0. 27 in. , wide, TFT color, approx. [. . . ]