User manual CANON I990

[. . . ] 2 Connect one end of the FireWire cable and extend the paper output tray. Paper Rest to the Macintosh, the other to the FireWire port on the printer. If your computer and operating system support FireWire, use the Firewire port. Otherwise, use the USB port. Power Cord 4 Slide the print head into the holder. Paper Output Tray The print head will rest at a slight angle. Front Cover 5 Open the front cover. The print head holder Ink Tanks BCI-6R Red BCI-6BK Black BCI-6PM Photo Magenta BCI-6G Green NOTE: The printer will perform a print head cleaning. [. . . ] Wait until the POWER lamp displays a steady green light before proceeding. automatically moves to the center. Remove the protective tape. 5 Lower the lock lever and press it down IEEE 1394 6 Remove the packaging from inside the paper until it clicks into place. guide. Pinch the paper guide and slide it to the left. Load the printer with a few sheets of blank paper, then slide the paper guide toward the left edge of the paper. FireWire Cable click Protective Tape Serial Number Paper Guide FireWire Port BCI-6C Cyan BCI-6PC Photo Cyan BCI-6M Magenta BCI-6Y Yellow Continue with Step 6 on side two. 6 Write down the serial number located to the right of the print head holder . You will need this later to register the product. 6 Windows Printer Driver Installation and Print Head Alignment ® 6 M ac in to sh 12 Start the print head alignment procedure. Macintosh® Printer Driver Installation and Print Head Alignment NOTE: For Mac OS 8. 6 to 9. x printer driver instructions, refer to the "Appendix" of the Quick Start Guide. W in do ws 1 Be sure to TURN THE PRINTER OFF 6 before continuing. POWER Button When the "Printer Connection" window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. 1 Turn on your Mac and your printer and a. For Windows XP click Start, select Control Panel, Printers and Other Hardware, then Printers and Faxes. b. Right-click the i9900 icon, then click Printing Preferences. NOTE: For Windows 98/Me/2000 click Start, then select Settings, Printers. When the "Installation completed successfully" screen appears, click Restart. e. Look at the printed patterns and input the values for each pattern that shows no flaws (least number of white stripes). Then click OK. 6 Start the print head alignment procedure. a. Double-click the Macintosh HD icon, then Applications folder. Double-click the Utilities folder, then the Print Center icon. NOTE: For Mac OS X 10. 3. x select the 9 Follow the on-screen instructions. When the "Installation has finished" screen appears, click OK. 10 Register your product to ensure product Printer Setup Utility icon. When the Printer List screen appears, select i9900, then click the Configure icon. support. Double-click on the Product Registration icon, found in the Mac OS X folder. Follow the on-screen instructions. 4 When the "Easy Install" screen appears, click Install. [. . . ] Follow the on-screen instructions. 4 When the "Easy Install" screen appears, click Install. The rest of the print head alignment process will take place automatically. Ensure paper is loaded and follow the on-screen instructions. This process will take a few minutes. NOTE: For Mac OS X 10. 3. x select the Utility icon. [. . . ]