User manual CANON IMAGECLASS MF5960DN DATASHEET

[. . . ] 1-3 Starting the Media Configuration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Chapter 2 Functions of the Media Configuration Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 The Functions of the Media Configuration Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Replacing all of the printer and printer driver media information at once . . . . . . . . . . . . . . . . . . [. . . ] Start the Media Configuration Tool. Note Refer to "Starting the Media Configuration Tool" (p. 1-5) on how to start the Media Configuration Tool. 4-1 Media Configuration Tool Guide 2. The Add Media Type wizard starts. Chapter 4 Adding Media Types 3. Select from the Printer list the printer where you will add the media type. Note When you do not save the printer driver where the media is to be added, the message Cannot find the printer driver to add to. Click the Cancel button to cancel adding the media type. 4. Communication with the printer starts and the following dialog box is displayed. Important Do not attempt to print or turn the off while the program is communicating with the printer. · When the program cannot communicate with the printer, the following warning message is displayed. Read the message and click the OK button. Note · When there are already over 64 media types saved in the printer driver, the following warning message is displayed. You can add more media types after you have deleted unnecessary media using the Edit Media Type wizard. Refer to Chapter 5 "Editing Media Types" (p. 5-1) for more information on how to edit media types. 4-2 Media Configuration Tool Guide Chapter 4 Adding Media Types When the program is done communicating with the printer, the screen moves to display Add Media Type: Enter Media Type Name. Input Media Name You can input the name of the media you have added here. The names you enter here display on the Printer driver, the Printer operating panel and the Remote UI. Indicated below are the conditions for inputting media names. The sheet is ejected when the specified time after printing has elapsed. Increase the value for this setting with media that does not dry quickly. b. Set the between scan drying time from the Between Scans list in Drying Time. The following settings are available for drying time in Between Scans. Between Scans No, 1 sec. , 3 sec. , 5 sec. , 7 sec. , 9 sec. Setting For media that has problems, such as ink smears on the page or colors that seem uneven during borderless printing etc. , increase the value for this setting. 4. Set the Roll Paper Margin for Safety of the media type to be added. Set the length of the near end margin for the roll paper from the Near End Margin list in Roll Paper Margin for Safety. The following settings are available for Near End Margin. Near End Margin 5 mm 20 mm Setting For media that has no problem when printing with a standard size margin. For media that has a strong tendency to curl, causing the printhead to scratch the surface. b. [. . . ] · You can also Change Display Order by dragging and dropping items on the list. · You cannot change the display position of Plain Paper. Changing the Name of the Media Types a. From the Media Types list select the media that you would like to change the name of, and double click. The Enter Media Type Name dialog box is displayed. b. [. . . ]