User manual CANON IMAGEFORMULA DR-C240 OFFICE DOCUMENT SCANNER DR-C240 USER MANUAL

[. . . ] User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference. FCC REGULATIONS (For 120 V model) Document Scanner, Model M111251 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When a scanning shortcut is assigned as a job, an icon for the assigned job No. will be displayed in the scanning shortcuts panel. [Name] Enter the Scanning shortcut panel name. 40 Selecting and scanning shortcuts 1 2 Place the document in the scanner. 22) Click the scanning shortcut panel. The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings. When the scan is finished, the [Scanned image preview screen] opens. CAUTION • If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, stop scanning, change the scanning conditions, and then try scanning again. • A multiple-page scan cannot be saved when it reaches the file size of 2 GB. Change the save settings if an error message is displayed. Hint If scanning continuously, set the next document, and click the [Scan more pages] button to start the document scan. If [Enable additional scan] is disabled in the scanning shortcut settings, the [Scan more pages] button will not be displayed. 3 To check the scanned image, click the [Finish] button. To edit scan images, see “Operations for the scanned image edit window” on p. 42 41 Hint If [Edit after scanning] is disabled in the scanning shortcut settings, the edit window will not be displayed. Click the [ ] button to edit the output settings. Start Button “Setting the output” (See p. 47) Click the [Cancel] button to discard the scanned image and return to the main window. When the output has finished, a popup window will be displayed. If saving the scanned image, a link to open the save destination folder will be displayed. Hint • If the [Do not display the main screen when the scan is started with the scanner button] checkbox is enabled in the Environmental settings, the main CaptureOnTouch window will not be displayed when a scan is started from the start button. Only dialog boxes and error messages during scanning, and completion popup windows are displayed. • If the [Do not display the main screen when the scan is started with the scanner button] checkbox is enabled in the Environmental settings, [Enable additional scan] and [Edit after scanning] will be disabled when scanning is started from the start button. Hint If you click [Open storage folder], the folder in which the saved scanned images were saved opens. Depending on the output settings, the [Open storage folder] link may not be displayed. Scanning with Start Button If you set frequently-used scans to the scanning shortcuts and assign them as jobs, you can run shortcut scans by pressing the start button. If you place the document, use the Job Select button to select the job No. to be run, and press the Start button, CaptureOnTouch starts and scanning starts. Operations for the scanned image edit window When scanning has finished, a preview window of the scanned image will be displayed. [. . . ] 31 S Scale factor adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Scan area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Scanner driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]