User manual CANON IMAGEFORMULA SCANFRONT 330

[. . . ] The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. [. . . ] 2-6. ) g Document Feed Tray Place documents here. 2-4. ) h USB Port (Front) Connect a USB1. 1/Hi-Speed USB2. 0 compatible USB memory device, USB keyboard, or USB mouse. i Power Switch Use this to turn the power ON. 3-3. ) * Use the Power OFF button on the touch panel to turn the power OFF. a Tray Extension Open this to prevent scanned documents from slipping off. b Document Eject Tray Open this tray when using the ScanFront. If scanned documents curl in the document eject tray, remove the entire tray. 2-4. ) c Panel Unit Open this when there is a paper jam or to perform maintenance. 2-10. ) d Touch Panel Touch this screen to operate the ScanFront. j Feed Selection Lever Use this lever to change the feed method for documents. 2-5. ) k Power Indicator Lights when the power is ON. 3-3. ) 1-6 ❏ Side and Rear 1 Before Use l USB Port (Rear Left) Connect a USB1. 1/Hi-Speed USB2. 0 compatible USB memory device, USB keyboard, or USB mouse. m Power Connector (24 VDC) Connect the plug of the supplied AC adapter. To scan such a document, make a photocopy of the document and then scan the photocopy. Wrinkled or creased documents Curled documents Torn documents Documents with paper clips or staples Carbon paper Coated paper Extremely thin, translucent paper Document with square punch holes ❏ Business Card Size Width: 2" (50. 8 mm) and above Length: 2 1/8" (53. 9 mm) and above Thickness 82 lb Cover (300 g/m2) and below IMPORTANT • If the stack of business cards that you placed is not fed properly, reduce the number business cards. • Business cards may sometimes be stacked in the wrong order when they are ejected, depending on the size and thickness of the business cards, and the orientation that they are loaded. 2-2 ❏ Card Size 2. 12" × 3. 37" (53. 9 × 85. 5 mm) (Conforming to ISO Standards) Thickness 0. 0299" (0. 76 mm) and below Insertion orientation Landscape IMPORTANT • Insert cards one at a time. • Be careful when inserting cards to avoid damaging them. 2 Handling 2-3 2. Preparing the Scanner When placing a document in the scanner, pull out the document eject tray so that it matches the size of the document, and then move the feed selection lever to the appropriate position for the desired feed method (Page Separation ON or OFF) for the document. ❏ Preparing the Document Feed Tray and Eject Tray Prepare the trays in accordance with the type of document. Hint If the output documents curl in the eject tray when scanning particularly thin documents, remove the eject tray. To remove the document eject tray, push in on the illustrated portions of the tray on both sides in the direction of the arrows a and pull out b. 1. Open the document eject tray b. Hint Open the center tray extension when output documents are likely to fall out of the tray. To reattach the eject tray, insert the protrusions on both sides of the tray into the holes on the scanner. After connecting the tray, make sure that it is attached securely. 2-4 ❏ Feed Selection Lever Change the position of the lever to the desired feed method for the document. Page Separation ON Move the lever downward to separate a stack of documents one page at a time in order to continuously feed the documents. Page Separation OFF Move the lever upward to feed a document with multiple pages attached together such as an invoice one page at a time without separating the pages. Page Separation ON ❏ USB Port You can insert a USB memory device to store image files. 2 Handling USB Memory You can also connect a USB keyboard and USB mouse to operate the ScanFront. Page Separation OFF Feed selection lever IMPORTANT Moving the lever upward (Page Separation OFF) and then scanning a stack of documents will cause multiple pages to be fed at the same time. IMPORTANT • The scanner will not start if you turn the power ON while a USB memory device is inserted. Insert the USB memory device after the scanner starts up and the Home screen appears. • Use USB memory that is not write-protected. [. . . ] 4-18 S Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Scan Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25, 4-19 Basic Condition Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25 Detailed Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]