User manual CANON IMAGEPROGRAF IPF750 MFP M40 CANON_PROFESSIONAL_PRODUCT_GUIDE_NEW.PDF

[. . . ] Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Notes for Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4. Functional Execution Command Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. Status Read Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6. [. . . ] When Input 3 has been selected, this command does not execute the source switching; just for switching to Input 3. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 11 NETWORK Command Command Detail Response “C08” [CR] Select Network Input Acceptable Unacceptable [ACK] [CR] “?” [CR] 11/25 IMAGEPROGRAF IPF750 MFP M40 Basic Serial Command Functional Specifications 6. 12 VOLUME + Command Command Detail Response “C09” [CR] Volume Up. This command works the same way as “VOLUME +” button of the remote control. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 13 VOLUME – Command Command Detail Response “C0A” [CR] Volume Down. This command works the same way as “VOLUME -” button of the remote control. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 14 SOUND MUTE ON Command Command Detail “C0B” [CR] Sound Mute On. This command works the same way as “MUTE” button of the remote control for Sound Mute On, but does not work for Sound Mute Off. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 15 SOUND MUTE OFF Command Command Detail “C0C” [CR] Sound Mute Off. This command works the same way as “MUTE” button of the remote control for Sound Mute Off, but does not work for Sound Mute On. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 16 VIDEO MUTE ON Command Command Detail “C0D” [CR] Video Mute ON This command works the same way as “SHUTTER” button of the remote control for Shutter Close, but does not work for Shutter Open. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 17 VIDEO MUTE OFF Command Command Detail “C0E” [CR] Video Mute OFF This command works the same way as “SHUTTER” button of remote control for Shutter Open, but does not work for Shutter Close. Acceptable Unacceptable [ACK] [CR] “?” [CR] 17/25 IMAGEPROGRAF IPF750 MFP M40 Basic Serial Command Functional Specifications 6. 49 FOCUS - Command Command Detail Response “C4A” [CR] Adjust on-screen focus by making focal length shorter. (The lens moves forward) This command works the same way as “FOCUS ▼” button of the remote control. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 50 COLOR MANAGEMENT Command Command Detail Response “C4E” [CR] Enable Color Management function Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 51 INPUT 1 ANALOG RGB Command Command Detail Response “C50” [CR] Select Analog RGB input in Input 1 Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 52 INPUT 1 SCART Command Command Detail Response “C51” [CR] Select SCART input in Input 1 Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 53 INPUT 1 DVI (PC DIGITAL) Command Command Detail Response “C52” [CR] Select DVI (PC Digital) input in Input 1 Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 54 INPUT 1 DVI (AV HDCP) Command Command Detail Response “C53” [CR] Select DVI (AV HDCP) input of Input 1 Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 55 LENS SHIFT UP Command Command Detail Response “C5D” [CR] Move projection area upward. Acceptable Unacceptable [ACK] [CR] “?” [CR] 18/25 IMAGEPROGRAF IPF750 MFP M40 Basic Serial Command Functional Specifications 6. 56 LENS SHIFT DOWN Command Command Detail Response “C5E” [CR] Move projection area downward. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 57 LENS SHIFT LEFT Command Command Detail Response “C5F” [CR] Move projection area leftward. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 58 LENS SHIFT RIGHT Command Command Detail Response “C60” [CR] Move projection area rightward. Acceptable Unacceptable [ACK] [CR] “?” [CR] 6. 59 AUTO PC ADJ. Command Command Detail “C89” [CR] Execute AUTO PC ADJ. function This command works the same way as “AUTO PC” button of the remote control. Sending this command during Auto PC Adj. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 60 PRESENTATION TIMER Command Command Detail “C8A” [CR] Start Timer for presentation This command works the same way as “P-TIMER” button of the remote control. Acceptable Unacceptable [ACK] [CR] “?” [CR] Response 6. 61 KEYSTONE ↑ Command Command Detail “C8E” [CR] Correct keystone distortion by reducing upper part of image. [. . . ] During this time, any Functional Execution Command is invalid. In this Power-Save Cooling Down function, the status moves to Power Save after the given Cooling down operation. Status： No signal Power-Save Cooling Down “24” Power Save “04” Response： “00” No signal status has passed for the time set by power management timer After about 90 sec. 23/25 IMAGEPROGRAF IPF750 MFP M40 Basic Serial Command Functional Specifications ・ “04” [CR] Status: Power Save This indicates it moves to Power-Save status by Power Management function as set in the Setting menu. ・ “21” [CR] Status: Cooling Down in process after OFF due to Lamp Failure When the projector is turned off due to lamp failure, it automatically starts Cooling Down operation. The projector returns “21” [CR]. [. . . ]