User manual CANON IMAGEPROGRAF IPF815 MFP M40 CANON_PROFESSIONAL_PRODUCT_GUIDE_NEW.PDF

[. . . ] Characters for commands must be Capital (A - Z). €œC” COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector changes received data to decode and returns a result after being ready to receive next command. 2 “？”［CR］：When the received data cannot be decoded. Command Pipelining When some functions need the command pipelining, the performance is the same as that of the remote control; 6. [. . . ] If this command is sent again while it is displayed, Power OFF is executed. When sending this command during Countdown, Countdown is terminated. Computer 1 Command Command Detail “C05” [CR] Select Computer 1 Input Although projector returns “OK”, Auto input is not executed with this command while Input search is set to On1 or On2. Computer 2 Command Command “C06” [CR] Select Computer2 Input Note 1) Although projector returns “OK”, Auto input is not executed with this command while Input search is set to On1 or On2. Video Command Command Detail “C07” [CR] Select Video Input Although projector returns “OK”, Auto input is not executed with this command while Input search is set to On1 or On2/ Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. This command operates the same way as “VOLUME+” button of the projector and remote control. VOLUME – Command Command Detail “C0A” [CR] Volume Down This command operates the same way as “VOLUME-” button of the projector and remote control. This command works the same way as “MUTE” button of the remote control for Mute ON, but does not work for Mute OFF. This command works the same way as “MUTE” button of the remote control for Mute OFF, but does not work for Mute ON. This command works the same way as “BLANK” button of the remote control for Blank ON, but does not work for Blank OFF. This command works the same way as “BLANK” button of remote control for Blank OFF, but does not work for Blank ON. When the received data cannot be decoded, the projector returns “?Transfer Example Get input mode for projector with basic commands Command(issues a command of getting current input mode) PC → Projector Projector → PC “C” “R” “1” “CR” “1” Processing (A few ms～1s) (Shows Computer 1 is selected) “CR” Response 7. Status Read Command Command Detail “CR0” [CR] Get the projector’s operating status Acceptable “%1” [CR] ”00” = Power ON “80” = Standby “40” = Countdown in process “20” = Cooling Down in process “10” = Power Failure “28” = Cooling Down in process due to Temperature Anomaly “88” = Coming back after Temperature Anomaly “24” = Power Save/Cooling Down in process “04” = Power Save “21” = Cooling Down is in process after Power off due to lamp failure “81” = Standby after Cooling Down due to lamp failure “? ” [CR] Response %1 Unacceptable 19 IMAGEPROGRAF IPF815 MFP M40/ LV-7295/LV-7390/ LV-8225 Basic Serial Command Specifications [Details of Response] “00” [CR] Status : Power ON Normal image is on the screen. €œ80” [CR] Status: Standby When the status is Standby, Status Read Commands are always acceptable, but Functional Execution Commands are not acceptable except POWER ON Command. “40” [CR] Status: Countdown in process When “Display” in Setting Menu is ON and POWER ON is executed , it starts Countdown. When “Display” in Setting Menu is OFF, processing Countdown is not executed and the status quickly moves to Power ON. “20” [CR] Status: Cooling Down in process When the status is Power ON , and POWER OFF Command (“C01”[CR]) is executed , it moves to Cooling Down status. This status automatically moves to Standby after lamp turns off and the fan spin finishes after about 90 seconds. This function is used to cool down the lamps and other optical parts and is quite important for projector’s reliability. During this time, Functional Execution Commands are invalid. [. . . ] 5 minutes with no signal “04” [CR] Status: Power Save This shows that it moves to Power Save status by Power management function in Setting menu. €œ21” [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector returns “21” [CR]. €œ81”［CRï¼½ Status: Standby after Cooling Down due to lamp failure This value is returned when Cooling Down operation due to lamp failure has been completed and the status has been moved to Standby. The status is kept until the next operation starts. [. . . ]