User manual CANON IMAGERUNNER 1330 METACONSOLE CUG V1.3

[. . . ] Keep the rear paper guide to LGL-size mark. Load the paper into the paper cassette with the print side down. Make sure the paper stack sits below the hooks (A) on the rear paper guide. 7 8 7 8 9 A A B A Pinch and slide the lock release lever so that the side paper guides match the side of paper. NOTE Make sure the paper stack does not exceed the load limit mark (A) and it is loaded under the hooks (B) on the side paper guides. A Gently insert the paper cassette as far as it will go. CAUTION Do not push in the paper cassette at an angle. Doing so may damage the paper sensing lever inside the machine. [. . . ] When you load other size and/or type of paper, change the paper size/type setting. For details, see Chapter 3, "Setting Paper Size and Type, " in the Basic Guide. ­ For loading paper in the multi-purpose feeder, see Chapter 3, "Print Media, " in the Basic Guide. CAUTION Do not load paper from the back of the machine. Doing so may damage the paper feeding assembly inside the machine. 9 10 Connect Telephone Cables B A Connect the supplied telephone cable to the line jack (A) and the wall jack. Connect your external telephone to the external device jack (B) if required. 11 12 Connect the Power Cord Set the Date and Time 1 2 Ex. 100% TEXT LTR 1 Entering Information ­ Numeric keys: Enters letters and numbers. ­[ ] or [ ]: Move the cursor position. ­ [Clear]: Deletes the character at the cursor position, or the entire entry if held for more than one second. [ [FAX] ] [OK] [ [Additional [Stop/Reset] Functions] [Clear] Numeric Keys ] Connect the power cord into the rear socket and the wall outlet. NOTE There is no power switch. The machine enters standby mode. 1 Press [Additional Functions]. 2 Use [ ] or [ ] to select <3 TIMER SETTINGS>, then press [OK]. 3 Use [ ] or [ ] to select <2 DATE&TIME SETTING>, then press [OK]. What if. . . <CLOSE COVER/FRONT COVER> is displayed: Make sure that the front cover is closed properly. (See "Install Toner Cartridge, " on p. 5. ) <TONER IS NOT SET/INSERT THE TONER> is displayed: Make sure that the toner cartridge is installed properly. ­ The <DRPD> mode requires subscription to a DRPD (Distinctive Ring Pattern Detection) service. Contact your telephone company for availability. 19 20 Installing Software Installation Procedure Before Installation: · Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel]. · For Windows 2000/XP, log on as an Administrator to install the software. · Make sure the machine is turned on before connecting the USB cable. · On the screen shown at each step, click on the circled button to proceed. System Requirements Microsoft Windows 98/98SE CPU: Intel® Pentium® 90 MHz or higher Memory: 64 MB or more Available Hard Disk Space: 435 MB or more Microsoft Windows Me CPU: Intel® Pentium® 150 MHz or higher Memory: 64 MB or more Available Hard Disk Space: 435 MB or more Microsoft Windows 2000 CPU: Intel® Pentium® 133 MHz or higher Memory: 64 MB or more Available Hard Disk Space: 435 MB or more Microsoft Windows XP (32-bit version) CPU: Intel® Pentium® II/Celeron® 300 MHz or higher Memory: 64 MB or more Available Hard Disk Space: 435 MB or more 1 2 If the MF3200 Series CD-ROM Setup screen is not displayed, on the Windows desktop, click [Start] [My Computer] (Windows 98/Me/2000: double-click [My Computer]). Open the CD-ROM icon, then double-click [MInst] ([MInst. exe]). 3 4 5 6 7 8 9 10 11 12 13 When you install PageManager and OmniPage, follow the onscreen instructions. 21 22 14 15 Bundled on the User Software CD When you install the following program, click on the [Additional Software Programs] button in step 2 of "Installation Procedure, " then follow the instructions that appear on the screen. A Connect the machine and your computer with a USB cable (A). You have now completed installation. Canon Cover Sheet Editor The Canon Cover Sheet Editor enables you to create original fax cover sheet templates for use with Canon fax driver. For details, see the online help for this program. 23 24 Contacting Service Center When you have a problem with your machine and you cannot solve it even if you refer to the manuals or online help, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A. M. [. . . ] For details, see the online help for this program. 23 24 Contacting Service Center When you have a problem with your machine and you cannot solve it even if you refer to the manuals or online help, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A. M. EST Monday through Friday and 10:00 A. M. on Saturday. Trademarks Canon, the Canon logo, and imageCLASS are trademarks of Canon Inc. [. . . ]