User manual CANON IMAGERUNNER 1435I IMAGERUNNER 1400 SERIES STARTER GUIDE

[. . . ] 5 Choosing the Method to Connect the Machine to the Computer. 3 Installation Requirements imageRUNNER 1435iF / 1435i About the Supplied Manuals  Getting Started (This manual): Read this manual first. This manual describes the basic machine settings, operations, and cautions. Be sure to read this manual before using the machine. [. . . ] Also, printed paper may be hot immediately after being output, so use caution when handling it. The laser beam can be harmful to the human body. The laser beam is confined in the laser scanner unit by a cover, so there is no danger of the laser beam escaping during normal machine operation. Read the following remarks and instructions for safety. ˆ− Never open covers other than those indicated in this manual. ˆ− Do not remove the caution label attached to the machine. Maintenance and Inspections WARNING • Before cleaning, turn OFF the power and unplug the power plug from the AC power outlet. failure to do so may result in a fire or electrical shock. € Unplug the power plug periodically and clean with a dry cloth to remove dust and grime. Accumulated dust may absorb humidity in the air and may result in a fire if it comes into contact with electricity. € Use a damp, well wrung-out cloth to clean the machine. dampen cleaning cloths with water only. Do not use alcohol, benzenes, paint thinners, or other flammable substances. Do not use tissue paper or paper towels. If these substances come into contact with electrical parts inside the machine, they may generate static electricity or result in a fire or electrical shock. € Check the power cord and plug periodically for damage. Check the machine for rust, dents, scratches, cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a fire or electrical shock. Consumables WARNING • Do not dispose of used toner cartridges and drum units in open flames. Also, do not store toner cartridges, drum units, or paper in a location exposed to open flames. This may cause the toner to ignite, and result in burns or fire. € If you accidentally spill or scatter toner, carefully wipe up the loose toner with a damp, soft cloth and avoid inhaling any toner dust. [. . . ] Condition d’alimentation Raccordez le télécopieur à une prise de courant plus terre à trois branches, du type simple ou double, et qui ne sert pas à alimenter un copieur, un appareil de chauffage, un climatiseur ou tout autre appareil électrique à thermostat. Laser Safety This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. also , this product is certified as a Class 1 laser product under IEC60825-1: 2007. [. . . ]