User manual CANON IMAGERUNNER 2200 MAC OS X V1.40 FAX GUIDE

[. . . ] 2 Remove all shipping tapes from the exterior of the machine. 3 Open the document feeder tray. 4 Pull out the paper cassette completely. 5 Attach the cassette extension to the cassette. 6 Attach the extension cover on the back of the machine. 7 Insert the paper cassette back into the machine. Install the cartridge. 1 Remove the cartridge from the bag. Keep the bag in a safe place for future use. [. . . ] Keep the bag in a safe place for future use. 2 Gently rock the cartridge several times to evenly distribute the toner inside. 3 Hold the cartridge on a flat stable surface with one hand, and break the tab and pull out the seal completely with the other hand. 4 Pull open the front cover by the indentations on both sides of the machine. 5 Hold the cartridge so that the instructions are facing up, and insert it in the machine horizontally as far as it will go. 6 Close the front cover of the machine. Arrow Mark Instructions Connect the telephone cable and any necessary external device. Connect external devices as follows: = Telephone line jack = External device jack Telephone or answering machine Telephone line Machine Telephone or answering machine Telephone and answering machine Telephone line Machine LINE TEL Answering machine Telephone Built-in computer modem and telephone Connect the telephone cable to the wall jack. Telephone line Machine LINE TEL Computer Telephone You can connect an external device if necessary (optional). Connect the power cord. 1 Plug the power cord into the rear socket . Then connect the other end of the cord to the wall outlet . Turn over to continue 2 When you connect the machine, the following messages should appear in the LCD. Approx. 7 seconds IMPORTANT For important safety instructions on installation and handling of the machine, see p. xiii of the Basic Guide. NOTE Make sure the correct paper size is specified in the machine. 2-7 of the Basic Guide. Set the fax receive mode. 1 Press [FAX] . 3 Press [ ] or [ ] to select the fax receive mode. Select from the following: 4 2 1 3 - <FAX ONLY MODE> to automatically receive faxes only. Open the CD-ROM icon, then double-click [setup (setup. exe)]. 5 When the Canon Multi-function Printers InstallShield Wizard screen appears, click [Next >] and follow the instructions on the screen. 6 When the installation is complete, click [Finish] to close the InstallShield Wizard . When prompted to connect the USB cable, click [OK] . 7 Make sure the machine's power is turned on, and connect the cable to the USB port on the back of the machine. Then connect the other end of the cable to the USB port on your computer. Click [Exit] to close the MF5550/MF5530 Main Menu. Remove the imageCLASS MF5500 Series User Software CD from the CD-ROM drive and store it in a safe place. Congratulations!You have now completed setting up your machine. Where to go from here. . . Once you have completed all steps in this sheet, see the Basic Guide for basic operations of all functions of your machine. If after reading the Basic Guide you require more detailed information, see the Facsimile Guide or Software Guide (included in the CD-ROM). NOTE Remember to register your machine to ensure product support. [. . . ] If after reading the Basic Guide you require more detailed information, see the Facsimile Guide or Software Guide (included in the CD-ROM). NOTE Remember to register your machine to ensure product support. The serial number is located on the back of the machine. Part no. [. . . ]