User manual CANON IMAGERUNNER 3320I MAC OS X V1.40 FAX GUIDE

[. . . ] Referring to the following figure, remove the tape and spacers on both sides of the cassette housed in the machine. Install the cartridge. 1 Remove the cartridge from the bag. Keep the bag in a safe place for future use. 2 Gently rock the cartridge several times to evenly distribute the toner inside. 3 Hold the cartridge on a flat stable surface with one hand, and break the tab and pull out the seal completely with the other hand. 4 Pull open the front cover. B A 5 Hold the cartridge so that the instructions (A) and the arrow (B) are facing up, and insert it in the machine horizontally as far as it will go. 6 Close the front cover of the machine. Assemble the cassette and load paper. B A 1 Hold the document feeder (A) with one hand, and open the document feeder tray (B) with the other. 2 Pull out the paper cassette completely. NOTE Pull the cassette straight/forward. Pulling it at an angle may damage the paper sensing lever inside the machine. 3 Attach the extension to the cassette. [. . . ] Pulling it at an angle may damage the paper sensing lever inside the machine. 3 Attach the extension to the cassette. The slots are keyed and must be inserted at a 90° angle. Once inserted, fold the extension as shown . 4 Pinch and slide the rear paper end guide to match the size of paper. NOTE Confirm that the paper guide is fitted in the paper size slit correctly. To load Legal-size paper: Pull the blue tab and extend the cassette as far as it will go. Keep the rear paper end guide to LTR size mark. If you are not using Legal-size paper, skip to the next step without extending the cassette. A 5 Load the paper into the cassette. Make sure the paper stack sits below the hooks (A). 6 Pinch and slide the side paper end guides to match the size of paper. A B 7 Even out the edges of the paper stack. Make sure the height of the stack does not exceed the limit marks (A) and that the side edges of the stack are below the hooks (B). 8 Insert the paper cassette back into the machine as far as it will go. NOTE If you do not completely insert the cassette into the machine, paper jams may occur. IMPORTANT Do not push in the cassette at an angle. Doing so may damage the paper sensing lever inside the machine. 9 Insert the tabs on the extension cover into the slots on the back of the machine, and carefully lower the cover until it sits on the cassette extension beneath it. IMPORTANT Do not load paper from the back of the machine. You have now completed the machine setup. Where to go from here. . . Once you have completed all steps in this document, see the Set-Up Sheet for Networking and Printing to set up the machine for use in a network and to install driver software. For basic operations of all functions of your machine, see the Basic Guide. For details on sending and receiving faxes, see the Facsimile Guide. For information on the driver software, see the Software Guide (included in the User Software CD). For details on the network function of the machine, see the Network Guide (included in the User Software CD). For information on remotely monitoring and controlling machine functions through a network, see the Remote UI Guide (included in the User Software CD). NOTE Remember to register your machine to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 U. S. A. [. . . ] For information on remotely monitoring and controlling machine functions through a network, see the Remote UI Guide (included in the User Software CD). NOTE Remember to register your machine to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 U. S. A. CUSTOMERS 1-800 OK CANON CANADA CUSTOMERS Part no. FA7-7063 (010) ©2005 Canon Inc. [. . . ]