User manual CANON IMAGERUNNER ADVANCE 4035 CANON AND THE ENVIRONMENT - IMAGERUNNER ADVANCE

[. . . ] 2 2 Set Up the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Items Included with the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Install Toner Cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Set Up Paper Cassette and Load Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ] to select <2 USER SETTINGS>, then press [OK]. ] to select <4 TEL LINE TYPE>, then press [OK]. ] to select telephone line type, then press [OK]. - <TOUCH TONE>: Tone dialing (Default) - <ROTARY PULSE>: Pulse dialing Press [Stop/Reset] to return to the Standby mode. 19 4 If you are using the MF4350d, skip this chapter. Set Up Network Connection (MF4370dn Only) Connect the LAN Cable Connect a LAN cable that is compatible with the LAN connector of this machine. Compatible LAN Cables A category 5 or greater twisted pair LAN cable is compatible with the machine. Connect one end to the 10Base-T/100Base-TX port on the back of the machine and the other end to a network router or a hub. ­ A LAN cable is not included with the machine. ­ If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. 20 4 Set Up Network Connection (MF4370dn Only) Connect the Machine to Network To use the machine by connecting to the network, you must set up the IP address. An IP (Internet Protocol) address is an identification number assigned to each individual computer connected to the Internet. To use the following functions, you must set up the IP address in advance. Remote UI: PC print: PC fax: Scan: Access and change the machine settings from browser on the computer by using the Remote UI software. Save scanned documents to the computer. The following flow chart indicates the settings needed for each function. Specify the IP Address Settings Automatic Setting By default, the IP address is assigned to the machine automatically by the DHCP server. Therefore, all you need to do when using DHCP is just to connect the network cable. After connecting the LAN CABLE, wait for 30 seconds until the machine gets the IP address. Check IP Address Setting To make sure this machine is communicating to the network properly, follow the procedure on p. 22. ­ It is recommended that the network administrator performs the procedure on p. For details, see online help for this program. PageManager makes it easy to scan, share and organize photos and documents. For details, see the online manual and online help for this program. NetSpot Device Installer (NSDI) NetSpot Device Installer enables you to set up the machine for network operations. For details, see the Readme file and online help for this program. NetSpot Device Installer (NSDI) is not supported on Windows Server 2008(32bit) and all of the 64-bit operating systems. To install ScanSoft OmniPage and Presto!PageManager, load the User Software CD into a computer, click on the [Custom Installation] button on the CD-ROM Setup screen, click on the [Next] button for USB connection , then follow the instructions that appear on the screen. 25 5 Set Up Computers and Software Network Connection (MF4370dn Only) Before Installation · The following procedures are explained using sample screens from Windows XP Professional. · The screen may differ according to the operating system, as well as the type and version of the printer driver. · For Windows 2000/XP/Server 2003/Vista/Server 2008, log on as an Administrator to install the software. · Click on the circled button on each screen to proceed to the next step. · Make sure the machine is turned ON. (See "Connect Power Cord and Turn On the Machine, " on p. [. . . ] Windows 2000: double-click [My Computer] on the Windows desktop. Right-click on the CD-ROM icon and select [Open], then double-click start. exe. Depending on the operating system you are using, a security protection message may be displayed. In this case, allow the contents to be displayed. 36 6 Appendix When you start the e-Manual, the screen below is displayed. If you are using a browser such as Internet Explore for Windows XP, ActiveX blocks pop-ups in the background. [. . . ]