User manual CANON IMAGERUNNER ADVANCE SÉRIE C5000 BROCHURE

[. . . ] Write down the serial number located inside the machine. You will need this to register your products. 5 Lower the Print Head Lock Lever carefully and press it down. 5 Close the Inner Cover and the Scanning Unit (Printer Cover). The pattern is printed. And Print Head is aligned automatically. OK Click 2 Load the stack of paper into the Cassette with the print side face down. [. . . ] Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. · The pattern is printed in black and blue. · Print Head alignment will take several minutes to complete. · When automatic Print Head alignment cannot be executed correctly, the message <Auto head align has failed. > is displayed on the LCD. Refer to "An Error Message is Displayed on the LCD" in the User's Guide. IMPORTANT For safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover). Windows® MP Drivers Installation W in do ws Macintosh® MP Drivers Installation M ac in to sh 6 Read the License Agreement and click [Yes]. Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click [OK]. 7 When the Printer Connection screen appears, ensure that the machine is connected to the computer with the USB cable, then turn the machine ON. The software will begin identifying the printer port being used. IMPORTANT If you cannot proceed to the next procedure after three minuets, refer to "Troubleshooting" instructions in the User's Guide. · A printer cable is not included. You must purchase a USB cable (less than 10 ft. /3 m) to connect your machine to a computer. Remove the USB cable connected to your computer. Then proceed from step 3 to install the MP Drivers. 2 Turn on your Mac. 3 Insert the Setup Software & User's Guide CD-ROM. If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. The system is restarted automatically. *When connecting from Mac OS X v. 10. 3. 3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again. 4 Double-click the Setup icon. 3 Insert the Setup Software & User's Guide CD-ROM. The setup program should run automatically. The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click [Start] and select [My Computer], then double-click the CD-ROM icon. 8 Follow the on-screen instructions to register your product. 9 When the Installation completed successfully window appears, click [Exit]. US Only When the Registration Screen appears, follow on screen instructions to register your product. You will need you product serial number, which is located on the inside of the machine. [. . . ] You will need you product serial number, which is located on the inside of the machine. Refer to Step 1- 8 . 5 When the Authenticate screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. 4 When the main menu appears, click [Easy Install] and follow the on-screen instructions. 11 After restarting the computer, start Printer Setup Utility (start Print Center when you use Mac OS X v. 10. 2. x) and then check that the printer name you want to use is shown in [Printer List]. If the printer name is not displayed, press the [Add] button to add the device. [. . . ]