User manual CANON IMAGERUNNER ADVANCE SÉRIE C7000 BROCHURE

[. . . ] Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor and Viewfinder The LCD monitor and viewfinder are produced with extremely highprecision manufacturing techniques. More than 99. 99% of the pixels operate to specification. Less than 0. 01% of the pixels may occasionally misfire or appear as red or black dots. [. . . ] Evaluative metering is the default metering mode. The camera divides images into several zones for light metering. The camera evaluates complex lighting conditions, such as the position of the subject, the brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. Evaluative 6 Shooting-Advanced Functions Center-Weighted Averages the light metered from the entire frame, but gives greater Average weight to the subject matter at the center. Spot AE Point Center AF Point Meters the area within the spot AE point frame. Locks the spot metering frame to the center of the LCD monitor. Moves the spot AE point to the AF frame. 1 Press the button to select a metering mode. button changes the metering mode as follows. (Center-Weighted Averaging) (Evaluative) Each press of the (Spot AE Point) The icon of the currently selected light metering mode appears on the LCD monitor (or viewfinder). [Evaluative] and [Center-Weighted Averaging] shoot the subject as it appears. To set [Spot AE Point], go to Step 2. 2 In the [ (Rec. )] menu, select [Spot AE Point]. See Selecting Menus and Settings (p. 73). 89 3 Use the or button to select [Center] or [AF Point], then press the MENU button. When [Spot AE Point] is set to [Center], the spot AE point frame ( ) appears at the center of the LCD monitor (or viewfinder). With [Spot AE Point], one AE point appears ( ) within an AF frame. This frame can be moved as one piece (p. 88). [ ]: Spot AE Point : AF Frame Adjusting the Exposure Mode Dial Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. 1 Select * (+/- (Exp. )) from the FUNC. - The ISO speed is set to the same setting to shoot the image. White balance data cannot be set with (Stitch Assist), but the white data acquired in another mode can be used. The custom white balance will not be canceled even if you reset camera settings to default (p. 81). 6 Shooting-Advanced Functions Changing the ISO Speed Mode Dial By raising the ISO speed, you can shoot bright images even in poor lighting conditions. This function is convenient when you want to prevent camera shake, shoot without the flash or shoot with a faster shutter speed in dark conditions. You can choose from the following speeds: Auto, 50, 100, 200 and 400. 1 Select * (ISO Speed) from the FUNC. menu and select the desired setting with the or button. * The current setting is displayed. You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. To take clean images, use as low an ISO speed as possible. The [AUTO] setting selects the optimal speed. It will automatically raise the speed when the light from the flash is insufficient to illuminate the subject matter. 93 Changing the Photo Effect Mode Dial By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. Effect Off Vivid Neutral Low Sharpening Sepia B/W Custom Effect* * , , and Records normally with this setting. [. . . ] (516) 328-5600 Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003. Réglementation canadienne sur les interférences radio Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 182 MEMO 183 Appendix Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. You can shoot with the settings saved in the mode. [. . . ]