User manual CANON IW DOCUMENT MANAGEMENT SYSTEM 2002 BROCHURE

[. . . ] For Users in the UK When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do not place it in confined narrow spaces. [. . . ] Press the button again to return to color display. [MAGN. B. LOCK] MAGN. Button Lock Recording Press the CUSTOM KEY (1 or 2) button. Pressing the button will lock the EVF MAGNIFYING buton to prevent its accidental operation. Press the custom key button again to reactivate the EVF MAGNIFYING button. [SHTR B. LOCK] SHUTTER Button Lock Press the CUSTOM KEY (1 or 2) button. Pressing the button will lock the SHUTTER buttons to prevent their accidental operation. Press the custom key button again to reactivate the SHUTTER buttons. [AE D. LOCK] AE SHIFT Dial Lock Press the CUSTOM KEY (1 or 2) button. Pressing the button will lock the AE SHIFT dial to prevent its accidental operation. Press the custom key button again to reactivate the AE SHIFT dial. [E. LCK B. LCK] EXP. LOCK Button Lock Press the CUSTOM KEY (1 or 2) button. Pressing the button will lock the EXP. LOCK button to prevent its accidental operation. Press the custom key button again to reactivate the EXP. LOCK button. 77 [CP BKWD KEY] Custom Preset Backward Key Press the CUSTOM KEY 2 button. Usually, pressing the CUSTOM PRESET SELECT button will cycle forwards to the following custom preset file. Pressing the custom key button instead will cycle backwards to the preceding custom preset file. CP backward key can only be operated with the custom keys. [FB] Flange Back Adjustment Press the CUSTOM KEY (1 or 2) button. The flange back adjustment menu appears. You can down-convert the video output with the respective menu settings. Standard of the tape HDV 1080/50i HDV 1080/25p 1 2 3 4 5 6 7 8 [LETTERBOX] setting [OFF] [ON] [OFF] [ON] HD/SD SDI terminal1 Unchanged 1080/50i Downconverted2, 5 COMPONENT OUT terminal Unchanged 1080/50i DownConverted3, 5 HDV/DV terminal Unchanged 1080/50i 1080/25p DownConverted4, 7 576/50i 576/50i 576/50i 576/50i 576/50i 576/50i 576/50i 576/50i 1080/50i8 1080/50i8 576/50i8 576/50i8 only. [SIGNAL SETUP] [SDI SPEC. ] set to [SD LOCKED]. [SIGNAL SETUP] [COMP. OUT] set to [576i]. [SIGNAL SETUP] [HD DOWN-CONV] set to [ON]. 16:9 picture is horizontally squeezed to a 4:3 aspect ratio. On-screen displays will not be embedded in the video output even if [SIGNAL SETUP] [SDI OUTPUT] is set to [ON(OSD)]. On-screen displays will not be embedded in the video output even if [DISPLAY SETUP/ ] [TV SCREEN] is set to [ON]. Converted to 50i. 80 Connecting to a Monitor/TV The different recording modes and the corresponding output terminals are given in the table below: HD/SD SDI Terminal* HD [LETTERBOX] 1920x1080 set to [OFF] COMPONENT OUT Terminal D3 (1440x1080) HDV/DV Terminal MPEG TS VIDEO and Terminals [LETTERBOX] SD SDI set to [ON] D1 (SD) MPEG TS SD 16:9 [LETTERBOX] 640x480 set to [OFF] D1 (SD) DV (SD) [LETTERBOX] SD SDI set to [ON] D1 (SD) DV (SD) SD 4:3 640x480 D1 (SD) Normal DV (SD) * only. Displaying the Viewfinder's Screen on an External Monitor The screen of an external monitor or viewfinder connected to the EVF2 socket will show the exact same picture as displayed on the camcorder's viewfinder screen. Use the supplied external monitor cable to connect to a monitor or TV equipped with component video inputs. External Connections External Monitor Cable (supplied) Signal flow Green Y Blue Pb Red Pr 81 Connection to a High Definition Monitor or HDTV 1 Using the HD/SD SDI Terminal INPUT White White Red Stereo Cable* (supplied) Signal flow Red R VIDEO L AUDIO S (S1)-VIDEO Open the terminal cover BNC Cable (commercially available) Signal flow * If [SDI OUTPUT] is set to [OFF] (no embedded audio), the audio signal is separate from the SDI video output signal Activate the HD/SD SDI output and select the appropriate video output option (HD or SD). 1. [. . . ] When you attach two battery packs, a battery pack can be exchanged without interrupting the power supply. Battery Pack BP-950G Charging Time 280 min. Additional Information BP-970G 380 min. Charging time varies according to the charging condition. ZR-2000 Zoom Remote Controller When the ZR-2000 is connected to the LANC terminal of a Canon camcorder, it is possible to control functions such as the start and stop of recording, the zoom and the focus functions while reviewing the picture on the local display without touching the camcorder. This is particularly useful while the camcorder is mounted on a tripod and you want to ensure maximum stability of a shot. 151 FU-2000 Color Viewfinder Unit When the FU-2000 is connected to the color viewfinder socket of the camcorder, it is possible to review the on screen picture without having to be next to the camcorder. Also, by connecting the FU-2000 to the optional ZR-2000 Remote Zoom Controller you can have complete control of the main operations of the camcorder while reviewing the on-screen picture without touching the camcorder. This mark identifies genuine Canon video accessories. [. . . ]