User manual CANON LV-7230

[. . . ] Multimedia Projector LV-X4 LV-7230 Owner's Manual E English Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Wide Zoom Lens This projector is equipped with Wide Zoom Lens which is 1. 6 times the zoom ratio, and it allows you to enjoy 100" screen size in range of 8. 2' (2. 5m) to 13. 1' (4m). User's Logo A projected image can be captured and used for the starting display of the projector with the Capture function. You can also display the captured image in an interval during your presentation instead of blackout image with the No show function. [. . . ] (From 0 to 63. ) Brightness Press the Point 7 button to adjust image darker and the Point 8 button to adjust image brighter. Press the Point 7 button or the Point 8 button for Color temp. (XLow, Low, Mid, or High) White balance (Red) Press the Point 7 button to lighten red tone and the Point 8 button to deepen red tone. (From 0 to 63. ) White balance (Green) Press the Point 7 button to lighten green tone and the Point 8 button to deepen green tone. (From 0 to 63. ) White balance (Blue) Press the Point 7 button to lighten blue tone and the Point 8 button to deepen blue tone. (From 0 to 63. ) Sharpness Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15. ) Gamma Press the Point 7 8 button to obtain better balance of contrast. (From 0 to 15. ) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SET button. The message "OK?" will appear. Select [Yes] to store manual adjustment. To set this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p31). Quit Closes the Image Adjust Menu. "OK?" message Move the pointer to [Yes] and then press the SET button. Store icon Press the SET button at this icon to store the adjustment. Selected Image level Press the Point 7 8 button to adjust value. 32 Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. Press the Point d button and move the red frame pointer to the function that you want to select and then press the SET button. Screen Menu Screen Menu icon Move the red frame to the function and press the SET button. Normal Provides image to fit screen size. True Provides image in its original size. When the original image size is larger than the screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. Press the SET button to expand the image size. [. . . ] The On-Screen Menu and figures in this manual may differ slightly from the product. 59 Appendix Configurations of Terminals RGB INPUT/COMPONENT INPUT/RGB OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN Pin Configuration 1 2 3 4 5 6 7 8 Red (R/Cr) Input / Output Green (G/Y) Input / Output Blue (B/Cb) Input / Output ----Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 ----Ground (Vert. sync. ) Ground / --------Horiz. Input / Output (Composite H/V sync. ) 5 10 15 4 9 14 3 8 13 2 7 12 1 6 11 Vert. Input / Output ----- SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 1 2 3 4 5 6 7 8 Serial RXD --------GND RTS / CTS TXD GND GND 8 5 76 43 21 USB CONNECTOR (Series B) Pin Configuration 1 2 3 4 Vcc - Data + Data Ground 2 1 3 4 Optional Parts The parts listed below are optionally available. When ordering those parts, give the item name and Model No. [. . . ]