User manual CANON LV-7260 / 7265 / 7365 / X7 BROCHURE

[. . . ] 6 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CameraWindow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 [Acquire Images] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 [Print] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It may take a few minutes, after connecting the camcorder, until you can download still images. Still images protected on the camcorder may lose this setting once they are downloaded to the computer. When downloading the still images by Image Capture that comes with Mac OS, the Exif version may change to 2. 1 and image information may be modified. Either install ImageBrowser to download the still images or use the following procedures. 1) Connect the camcorder to the computer, and start Image Capture. 3) Remove the checkmark from [Embed Colorsync profile] in the [Download Options] tab and click [OK]. E 1 2 3 Close all programs that are running, and check that a camcorder is not connected to the computer. Set the DIGITAL VIDEO SOLUTION DISK in the computer's CD-ROM drive. Double click the CD-ROM icon and the [CanonDigitalVideoInstaller] icon. Installing the Digital Video Software 21 Macintosh 4 Click Digital Video Software [Install]. Installer Panel 5 Select [Easy Installation] and click [Next]. To install the software individually, select [Custom Installation]. When installing the software by selecting [Easy Installation], EOS Utility (a software for downloading still images from the Canon EOS Digital SLR Cameras) will be installed. This software is used only for compatible Canon EOS Digital SLR Cameras, and the camcorder does not support this software. 6 Read the license agreement and click [Agree] to accept the terms. 22 Installing the Digital Video Software 7 Review the installation settings and click [Next]. E 8 When the "Installation has finished. " message appears, click [OK]. After the installation is complete, restart the computer as prompted. 9 Remove the DIGITAL VIDEO SOLUTION DISK from the CDROM drive. When installation is complete, remove the DIGITAL VIDEO SOLUTION DISK before you connect the camcorder to the computer. Installing the Digital Video Software 23 Macintosh Before Downloading Images Connecting the Camcorder to a Computer Be sure to install the Digital Video Software before you connect the camcorder to the computer. Make sure the camcorder is being powered using the power adapter before connecting it to a computer. E Downloading Still Images (ImageBrowser) 25 Macintosh Using the Computer to Download Still Images You can select a downloading method in the Camera Control window. Auto-downloading 1 Connect the camcorder to the computer ( 24). · The Camera Control window will be displayed. When it does not appear automatically, click the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop). · If you do not wish the Camera Control window to open automatically when you connect the camcorder, click the [File] menu and clear the check mark from the [Displays this screen when the camera is connected]. 2 Click [Starts to download images]. Click [Quit] to close the Camera Control window after downloading images. Camera Control window 26 Downloading Still Images (ImageBrowser) Applying Auto-downloading Settings This task allows you to apply auto-downloading settings. You can specify the types of still images and the destination folder. 1 In the Camera Control window, click the [Acquire Images] tab and click [Preferences]. E 2 Select [Change auto download settings] and click [Next]. Downloading Still Images (ImageBrowser) 27 Macintosh 3 Select the image type to be downloaded and click [Next]. Place a check mark here if you wish the original image in the camcorder to be deleted after downloading. 4 Specify the destination folder settings and click [Next]. Destination Folder Click this button to browse where you want to save the images. Select to specify the name of the subfolder. 28 Downloading Still Images (ImageBrowser) 5 Specify a process to perform after the image is downloaded and click [Next]. E Below window will be displayed when you select [Perform selected processes consecutively] (You can redisplay the window by clicking [Select]). Select a process to perform after the image is downloaded, and click [OK]. 6 Click [Finish]. Placing a check mark here makes images in the camcorder to be automatically downloaded when the camcorder is connected. Downloading Still Images (ImageBrowser) 29 Macintosh Downloading the Selected Still Images 1 Click [Lets you select and download images]. 2 Select images you wish to download and click [Download Images]. · Clicking on 2 images while holding down the [option] + [shift] key selects also all images between the 2 images. · Clicking on different images while holding down the [shift] key selects multiple images. A blue frame appears around the selected image. 30 Downloading Still Images (ImageBrowser) 3 Confirm the settings and click [Start Download]. · ImageBrowser starts, and Browser Window appears. E Setting for the folder and the subfolder for downloaded images Settings for the file prefix and the consecutive numbers · To make changes, click [Change Settings]. [Specify Folder] Tab Specify the settings of the folder and subfolder. [Specify File Name] Tab Specify the file name at which to save the images. Downloading Still Images (ImageBrowser) 31 Macintosh Using a Card Reader/Writer The basic operations are the same as when you connect the camcorder to the computer. Follow the procedure below to open the CameraWindow. For instructions on how to connect the card reader/writer, please refer to its manual. [. . . ] Check if your computer settings allow recording. · The sound cannot be played back on the camcorder. 1 In the Browser Area, select a still image and select [Sound] [Record] from the [File] menu. The recording window appears. 2 Click and start recording when the [Save] button is enabled. 3 Click [Save] to stop recording. · appears on the still image. · The sound file will be copied in AIFF type (extension ". AIF") to the same folder as the still image. · To play back the sound, select an image with a sound icon and select [Sound] [Play] from the [File] menu. [. . . ]