User manual CANON LV-7300 BROCHURE

[. . . ] Before you do, we suggest that your spend a little time reading this manual to familiarize yourself with the operating procedures so that you will receive maximum satisfaction from the many features included in your new projector. This owner's manual will acquaint you with your projector's features. Through the years, we have found that many service requests were not caused by problems with our projectors. They were caused by problems that could have been prevented, if the owner had followed the instructions in the manual. [. . . ] Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button. It indicates the level of the item. Fine sync. Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255. ) Total dots The number of the total dots in one horizontal period. Adjust the number to match your PC image. White balance (Red / Green / Blue) Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color and press POINT RIGHT button to deepen the color. (From 0 to 63. ) Contrast Press POINT LEFT button to decrease contrast, and press POINT RIGHT button to increase contrast. (From 0 to 63. ) Brightness Press POINT LEFT button to darken the image, and press POINT RIGHT button to brighten the image. (From 0 to 63. ) Each of the keys operates as follow. Move the image by pressing the POINT UP / DOWN / RIGHT / LEFT buttons. PICTURE POSITION dialog box Press the POINT UP / DOWN / RIGHT / LEFT buttons to move the image To cancel POSITION mode, press any button except SELECT, RIGHT CLICK, POINT, PAGE v/w or LASER button. To recall the position previously adjusted, press NORMAL button. 28 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button. Move the arrow to the function and press the SELECT button. True To make the image into its original size select True in the dialog box. When the original image size is larger than the screen size (1024 x 768), this projector enters Digital Zoom mode automatically. Keystone When the image is distorted vertically, select Keystone in the dialog box. The ON-SCREEN menu and SCREEN ADJUST menu disappears and the message “Keystone” is displayed. Correct the Keystone distortion by pressing the KEYSTONE v/w button or the POINT UP/DOWN button(s). [. . . ] q Make sure nothing is between the Remote Receiver and the Remote Control Unit. q Make sure you are not too far from the projector when using the Remote Control Unit. Maximum operating range is 16. 4’ (5m). . q Check the cable connection between the projector and the computer. [. . . ]