User manual CANON LV-7510 BROCHURE

[. . . ] If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center. Safety Precaution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. – This projector produces intense light from the projection lens. Do not stare directly into the lens as much as possible. [. . . ] Total dots Adjust the number of total dots in one horizontal period. Press the POINT LEFT/RIGHT buttons to adjust the number to match your PC image. Selected Mode Shows status (Stored/Free) of the selected Mode. Position H Press the POINT LEFT/RIGHT buttons to adjust the horizontal picture position. Position V Press the POINT LEFT/RIGHT buttons to adjust the vertical picture position. Current mode Press the OK button to show H-sync freq. When the image has a dark bars, try this adjustment. Display area H Adjusts the horizontal area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value. Display area V Adjusts the vertical area displayed by this projector. Press the POINT LEFT/RIGHT buttons to decrease/increase the value. Press the OK button at the Current mode icon to show information of the computer connected. Press the OK button at this icon to display the previous items. Press the POINT LEFT/RIGHT buttons to adjust the value. Press the POINT UP/DOWN/LEFT/RIGHT buttons to pan the image. The Panning function can work only when the image is larger than the screen size. The projected image can be also expanded by pressing the D. ZOOM ▲ button on the remote control unit. Digital zoom – When the Digital zoom – is selected, the On-Screen Menu disappears and “D. Press the OK button to compress the image size. The projected image can be also compressed by pressing the D. ZOOM ▼ button on the remote control unit. To cancel the Digital Zoom +/– mode, press any button except D. ZOOM ▲/▼, OK, POINT, and LASER buttons. NOTE: • True, Full, and Digital zoom +/– cannot be operated when “480i, ” “575i, ” “480p, ” or “575p is selected on the PC SYSTEM Menu. (p. 25) • The Screen Menu cannot be operated when “720p (HDTV), ” “1035i (HDTV), ” or “1080i (HDTV)” is selected on the PC SYSTEM Menu. (p. 25) • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than 1600 x 1200, lower the resolution before connecting the projector. • The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode. [. . . ] ● HDB 15 pin-SCART 21 pin Cable ● Ultra Wide Angle Lens ● Wide Angle Zoom Lens ● Long Focus Zoom Lens ● Ultra Long Focus Zoom Lens ● Network Imager ● Replacement Lamp ● Ceiling Mounting Hanger Type No. : LV-CL07 LENS REPLACEMENT The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer. [. . . ]