User manual CANON MP 60 BROCHURE

[. . . ] DIM-594 Digital Video Software Instruction Manual Mode d'emploi Manual de Instrucciones Version 13 E DV Network Software Version 2 Instruction Manual (Installation and Preparation) F E F Mode d'emploi (Installation et préparation) Es Es Manual de Instrucciones (Instalación y preparativos) This instruction manual explains how to install the software, connect the camcorder to a computer, and download images from a memory card to a computer. For more detailed operational instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows or DIGITAL VIDEO SOLUTION DISK For Macintosh. Ce manuel d'instruction explique comment installer le logiciel, connecter le camescope a l'ordinateur et telecharger des images a partir d'une carte memoire sur un ordinateur. Pour des instructions de fonctionnement plus detaillees, reportez-vous au manuel au format PDF fournie sur le disque DIGITAL VIDEO SOLUTION DISK For Windows ou DIGITAL VIDEO SOLUTION DISK For Macintosh. [. . . ] If you wish to turn off the ND filter: Open the menu and select [CAMERA SETUP]. Select [ND], set it to [OFF] and close the menu. When the Focus-Priority mode is set to [ON]: When you press the PHOTO button fully before F and focusing frame turn green, it may take up to 2* seconds until focus is adjusted and the still image can be recorded to the memory card. * Up to 4 seconds in the Low Light and the night modes. If the subject is not suitable for autofocus, the focusing frame turns yellow and locks the focus. Adjust the focus manually with the SET dial. When the Focus-Priority mode is set to [OFF]: No focusing frame appears. In step 2, F turns green, and focus and exposure are locked. The camcorder shuts off when you do not operate it for 5 minutes to save power. " AUTO POWER OFF" appears 20 seconds before shutoff. To continue recording, turn the POWER switch to OFF and then back to CAMERA. Recording a Still Image on a Memory Card While Recording Movies on a Tape When you are recording a movie on a tape, you can record the same picture as a still image on the memory card. · When you press the PHOTO button on the wireless controller, recording starts immediately. 4. Press the PHOTO button fully. The card access indicator flashes. 99 When recording from a tape in the camcorder or other video devices: - A still image recorded from an image in 16:9 format will be vertically compressed. - The data code of the still image will reflect the date and time it has been recorded on the memory card. - The size of the still image will be 640 × 480. When connecting with a DV cable, make sure that no USB cable is connected to the camcorder. Screen Displays during Still Image Recording q w e w Remaining Card Capacity for Still Images flashing in red: No card in green: 6 or more images in yellow: 1 to 5 images in red: No more images · The indication may not decrease even though a recording has been made, or may decrease by 2 images at once. · All indicators are displayed in green when a memory card is played back. q Still Image Quality Indicates the image quality of the still image. "e" Card Access Display Indicates that the camcorder is writing on the memory card. e Image Size Indicates the still image size. 100 Using the Flash You can use the built-in flash for recording still images in dark places. The flash is equipped with the red-eye reduction mode. PHOTO button (flash) button E O PHOT CARD Assist lamp Flash Selecting the Flash Mode (auto) The flash fires automatically according to the brightness of the subject. (red-eye reduction, auto) The flash fires automatically according to the brightness of the subject and the assist lamp lights up to reduce the red-eye effect. (flash on) (flash off) The flash always fires. Use this setting in places where flash photography is prohibited. PLAY (VCR) CARD CAMERA CARD PLAY Using a Memory Card CAMERA Press the (flash) button. · The setting changes with each press of the button. · The symbol of the selected flash mode appears on the screen. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required. Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada's option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]