User manual CANON MV960

[. . . ] PUB. DIE-252 English Digital Video Camcorder Instruction Manual English Introduction Basic Functions Advanced Functions Editing Mini Digital Video Cassette Using a Memory Card Direct Printing Please read also the following instruction manual (electronic version on PDF file). For further details refer to the installation guide. DIE-245 Digital Video Software Version 19 Instruction Manual E Transferring Images This instruction manual explains how to install the software, connect the camcorder to a computer, and download still images from a disc or a memory card to a computer. If you are using Windows operating system, use the supplied DIGITAL VIDEO SOLUTION DISK For Windows. [. . . ] Use the editing software supplied with your computer/capture board to transfer video recording from tape to computer. Refer to the instruction manual of the software. A driver is preinstalled on Windows operating systems later than Windows 98 Second Edition and Mac operating systems later than Mac OS 9, and will be installed automatically. Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable. IEEE1394 (DV) terminal DV cable (optional) 6-pin 4-pin Operation may not work correctly depending on the software and the specifications/settings of your computer. If the computer freezes while you have connected the camcorder, disconnect and reconnect the DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them. Make sure that camcorder and computer are not connected with a USB cable before connecting the camcorder to the computer using the DV cable. Otherwise, the computer may not operate properly. We recommend powering the camcorder from a household power source while it is connected to the computer. Refer also to the instruction manual of the computer. 80 Inserting and Removing a Memory Card Using a Memory Card You can use commercially available SD Memory Cards or MultiMediaCards (MMC) with this camcorder. The SD Memory Card has a protect switch to prevent accidental erasure. Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. E Terminals Inserting the Card 1. Insert the memory card all the way into the memory card slot. Close the cover. If the memory card is not correctly inserted the cover will not close - do not forcefully close the cover. Verify that the memory card is inserted in the correct direction. 5. Turn on the camcorder. Removing the Card Do not forcefully remove the memory card without first pushing it in. Using a Memory Card 1. Turn off the camcorder. Make sure that the CARD access indicator is not flashing before you turn off the camcorder. 2. Close the cover. This camcorder is compatible with SD Memory Cards or MultiMediaCards only. Do not use any other types of memory cards. Proper operation cannot be guaranteed for all memory cards. Turn off the camcorder before inserting or removing the memory card. [. . . ] File Format Design rule for Camera File System (DCF), Exif 2. 2** compliant, DPOF compliant Image Compression Method Still image: JPEG (compression: Super Fine, Fine, Normal) Movie: Video data: Motion JPEG, audio data: WAVE (monaural) * The camcorder's operations have been tested with SD memory cards up to 2GB. Performance cannot be guaranteed for all memory cards. ** This camcorder supports Exif 2. 2 (also called "Exif Print"). Exif Print is a standard for enhancing the communication between camcorders and printers. [. . . ]