User manual CANON PAGEROUTER BROCHURE

[. . . ] All statements, technical information and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representation or warranties concerning the products described. Specifications are subject to change without notice. As an ENERGY STAR partner, Canon U. S. A. , Inc. , has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All information regarding non-Canon products was compiled from publicly available information. [. . . ] Close all open software applications before reinstalling the printer driver. Refer to the Easy Setup Instructions for installing the printer driver. Cannot Install the Installation Printer Driver procedure not followed correctly Other applications running in the background Installation does not start automatically when the CD-ROM is inserted into the drive If printer driver installation did not start automatically when you inserted the CDROM into the CD-ROM drive: 1. Click Start and select My Computer Computer. For non-XP Windows users, open the My Computer window, and then double-click the CD-ROM icon. Double-click the CD-ROM icon on your desktop to start installation. Installation CDROM not working properly Ensure that there are no problems with the Setup Software & User's Guide CDROM. Use Windows Explorer to ensure that the CD-ROM can be read. Ensure that the CD-ROM icon is displayed on the desktop. If there is any problem with the CD-ROM contact the Customer Care Center. CD-ROM, Unable to proceed beyond the Printer Port Screen Reinstall the printer driver 1. Click Cancel Cancel. 2. When the Terminate Installation screen is displayed, click OK OK. See "Paper Does Not Feed Properly on page 49. Properly" Paper Print Quality not set properly Printed Paper Curls or Ink Blots Paper being used is too thin Color Intensity setting is too high Paper feed roller is dirty 46 Troubleshooting Problem Printed Surface is Scratched Possible Cause Inappropriate paper type used Try This Check to see if the paper you are printing on is too thick or curled. See "Print Media to Avoid on page 3. Avoid" Print Note that smudging may occur at the top and bottom edges of the paper when using Borderless Printing. Ensure that the paper you are using is compatible with Borderless Printing. See "Media Types Suitable for Borderless Printing" on page 22 Media Printing See "Media Types Suitable for Borderless Printing" on page 24 Media Printing 47 Troubleshooting Troubleshooting Printer Hardware Problem Printer Does Not Start or Printer Stops During Print Jobs Possible Cause Print head has overheated due to long periods of continuous printing Try This Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time. The print head is designed to automatically pause at line breaks before resuming printing in order to cool down. Caution The area around the print head can become extremely hot during extended print operation. Always avoid touching the print head and its peripheral components. Printing highresolution photographs and graphics Printer cable is too long There may be problems in your operating system Wait until the print job finishes. The POWER lamp flashes green while the print data is being processed. [. . . ] 31 Print Head Deep Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 print head holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Print Media to Avoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]