User manual CANON PC3 BROCHURE

[. . . ] COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, OPTURA600 A systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Book Page 86 Friday, June 3, 2005 9:27 AM Selecting the Light Metering Mode You can select the method the camera uses to evaluate the brightness of your subject. AVERAGE SPOT Appropriate for standard shooting conditions, including backlit scenes. The camcorder divides images into several zones for light metering. It evaluates complex lighting conditions, such as the position and brightness of the subject, background, direct light or backlight, and adjusts the exposure of the main subject accordingly. Averages the light metered from the entire screen, giving more weight to the subject in the center. Meters the area within the spot AE point frame. Use this setting for adjusting the exposure matching the subject in the center of the screen. The spot AE point frame can be tied to the AF frame ( 65). Select the light metering mode symbol followed by a setting option. Book Page 87 Friday, June 3, 2005 9:27 AM Changing the Focusing Mode You can change the AF (autofocus) frame selection mode. 9 Point AiAF (Auto selection) Center point Depending on the shooting conditions, an AF frame is automatically selected from the 9 frames and focused. Three still images in different exposures are recorded to the memory card. Book Page 89 Friday, June 3, 2005 9:27 AM The drive mode can also be selected from the FUNC. Menu is being displayed, the DRIVE MODE button cannot be used. Maximum number of continuous shots at one time: Still Image Size 2304 x 1736 1632 x 1224 1280 x 960 640 x 480 Frames per Second Normal speed 2. 8 frames 5 frames 5 frames Maximum Number of Continuous Shots 10 images 10 images 60 images 60 images E These figures are approximate and vary with the recording conditions and subjects. Sufficient space on the memory card is required. Continuous shooting stops when card is full. The number of frames per second will be lower when “ ” (camcorder shake warning) is displayed on the screen. When using the built-in flash in normal and high-speed continuous shooting mode: 2304 x 1736/1632 x 1224: 2. 1 frames/second 1280 x 960/640 x 480: 2. 5 frames/second Make sure that there is sufficient space on the memory card. [. . . ] You will be directed to the nearest service facility for your product. This Limited Warranty covers all defects encountered in normal use of the equipment and does not apply in the following cases: A) Loss or damage to the equipment due to abuse, mishandling, accident, improper maintenance, or failure to follow operating instructions; B) If the equipment is defective as a result of leaking batteries, sand, dirt or water damage; C) If defects or damages are caused by the use of unauthorized parts or by service other than our authorized agent; D) If the equipment is used for commercial or industrial use. This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it apply to equipment purchased outside the United States. This warranty does not cover units sold to rental firms, military operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications. [. . . ]