User manual CANON PC740 BROCHURE

[. . . ] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Adjusting to [+] detects more vivid skin tones, and to [-] detects paler skin tones. • AREA: Adjust the color range for detection of the skin area. Adjusting to [+] detects a wide color range, and to [-] detects a narrow color range. • Y LEVEL: Adjust the brightness for detection of the skin area. Adjusting to [+] detects brighter skin color, and to [-] detects darker skin color. 81 Using the Custom Preset You can define preset levels for 23 recording specifications used when recording on tape (17 when recording still images on the memory card). Up to 6 custom presets can be stored on the camcorder, and up to 20 can be stored on the memory card. You can copy the camcorder’s custom presets to the memory card. Also, while you are recording on the tape and simultaneously record a still image on the memory card, the current recording specifications can be saved as a custom preset on the card. Later you can load that custom preset from the memory card to the camcorder. The recording specifications that can be saved in a custom preset: Gamma curve*, knee, black stretch/press, master pedestal*, setup level*, sharpness, horizontal detail frequency, horizontal/vertical detail balance, coring, NR1*, NR2*, color matrix*, color gain, color phase, R gain, G gain, B gain, R-G matrix, R-B matrix, G-R matrix, G-B matrix, B-R matrix and B-G matrix. * Available only when recording on the tape. Gamma Curve [GAM] (only in CAMERA mode) You can select from [NORMAL], [CINE1] or [CINE2]. Output [NORMAL] [CINE1] [CINE2] Representation of the setting Input Knee Point Adjustment [KNE] Adjust the dynamic range (knee point) in the highlight area of the image to prevent overexposure. When you finish renaming the custom preset file, press the SET button. You will return to the custom preset submenu. 5. Close the menu. Protecting a Custom Preset File 1. Open the menu and select [CUSTOM PRESET], followed by [ 2. From the edit submenu, select [PROTECT]. EDIT]. • Next to the custom preset number the protect mark will appear. • To cancel the protection, repeat the procedure for a custom preset file with the mark. Resetting a Custom Preset File 1. Open the menu and select [CUSTOM PRESET], followed by [ 2. From the edit submenu, select [RESET]. A confirmation screen will appear. EDIT]. 3. Turn the SELECT dial to select [YES] and press the SET button. You will return to the custom preset submenu. 4. Close the menu. A protected preset file cannot be reset. Activating the Custom Preset Settings 1. Press the CUSTOM PRESET SELECT button. • Repeatedly pressing the button will cycle through the available custom preset files. [. . . ] Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The digital video equipment is used for commercial, professional or industrial purposes. This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head cleanings, nor does it apply to digital video equipment purchased outside Canada. [. . . ]