User manual CANON PC785 BROCHURE

[. . . ] Lea también el manual de instrucciones Digital Video Software (en archivo PDF). Para mayores detalles, refiérase a la guía de instalación. Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. [. . . ] - Images whose file names have been changed. Index Screen 1 Move the zoom lever toward W. The still images index screen appears. 2 Select ( , ) an image. • Move the green selection frame to the image you want to view. • If you have a lot of still images, you may find it easier to browse entire index pages instead. Move the zoom lever toward W to extend the green selection frame to the whole page, and move ( ) between index pages. Move the zoom lever toward T to return to moving between single images. The index screen closes and the selected image is displayed. 3 Press ( Slideshow SLIDESHOW Magnifying Photos during Playback During playback, still images can be magnified up to 5 times. 2 Select ( ) [ SLIDESHOW] and press ( ). 3 Select ( ) [START] and press ( ). • Images are played back one after another. to stop the slideshow. 1 Move the zoom lever toward T. • The image is magnified by 2 times and a frame appears indicating the position of the magnified area. 76 • To further enlarge the image, move the zoom lever toward T. To reduce the magnification to less than 2 times, move the zoom lever toward W. • will appear for images that cannot be enlarged. Erasing All Images The following procedure will erase all the non-protected still images from the memory card (all images except those with the mark). (flash off) The flash does not fire. NEXT 78 dark the assist lamp may light up briefly in order to enable the camcorder to focus more accurately (AF-assist lamp). You can also set [AF AST LAMP] to [ OFF] so the assist lamp does not light up ( 49). - The camcorder may not be able to focus even if the AF-assist lamp is on. - The brightness of the AF-assist lamp could be an inconvenience. Consider turning it off in public places such as restaurants. Options [ SINGLE] Default value Records a single still image. [ CONT. SHOOT. ] (Continuous Shooting), [ HISPEED CONT. SHOOT. ] (High-Speed Continuous Shooting) Captures a series of still images as long as you hold PHOTO pressed down. For the number of frames per second, refer to the sidebar on page 79. [ AEB] (Auto Exposure Bracketing) Continuous Shooting and Exposure Bracketing (Drive Mode) Take a series of pictures of a moving subject or record the same picture in 3 levels of exposure in order to choose later the picture you like the best. POINTS TO CHECK The camcorder records a still image in three different exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the shot you like the best. FUNC. ( 27) FUNC. ( 26) FUNC. Icon of the currently selected Drive Mode Desired option Mode switch: P (except for the [ FIREWORKS] recording program). Maximum number of continuous shots Number of frames (shots) per second Normal speed High speed Using the flash 3 frames 5 frames 2. 1 frames Maximum number of continuous shots 60 images These figures are approximate and vary with the recording conditions and subjects. The actual number of frames per second will be lower when (camcorder shake warning) is displayed on the screen. 79 Photos CONTINUOUS SHOOTING/ HIGH-SPEED CONTINUOUS SHOOTING 1 Press PHOTO halfway to activate the autofocus. [. . . ] This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The digital video equipment is used for commercial, professional or industrial purposes. This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, DVD discs, nor does it apply to digital video equipment purchased outside Canada. TO OBTAIN WARRANTY SERVICE Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Canon Service Facilities in Canada. [. . . ]