User manual CANON PC850 BROCHURE

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] • Canon's PictBridge-compatible printers: If printing does not resume automatically after you solved the problem, touch [Continue] to resume printing. If that option is not available, touch [Stop] and then restart printing from the beginning. • Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection. Print Orders You can mark in advance photos you want to print from those recorded on the memory card, and set the desired number of copies as a print order. Later, you can easily print out the print orders by inserting the memory card into the SD memory card slot* of DPOF-compatible printers or self-serviced digital photo kiosks. You can set print orders for up to 998 photos. * Make sure the external device is compatible with the type of memory card used. Operating modes: Marking Single Photos with Print Orders 1 In single photo view, select the photo you want to mark with a print order. Check that you are viewing photos recorded on the memory card. (g appears next to the photo number. ) 2 Touch the screen to display the playback controls. 3 Mark the photo with a print order. [Edit] 8 [Print Orders] 8 [Z] or [O] to set the number of copies 8 [Set] Photos 119 • The total number of copies in the DPOF print order appears next to the H icon. • To cancel the print order, set the number of copies to 0. 4 Drag your finger left/right to select another photo to mark with a print order or touch [a]. Setting Print Orders from the Index Screen 1 Open the [Photos] index screen. Change the following settings on the camcorder: - y 8 [TV Type] according to the TV set (widescreen or 4:3), if the TV cannot automatically detect and change the aspect ratio - 6 8 [AV/headphones] to [H AV] Yellow White STV-250N Stereo Video Cable (supplied) Red External Connections 123 Connection D USB Type: Digital data connection Connect to a computer to save your recordings, to the optional DW-100 DVD Burner to create DVD discs from them, or to a printer to print out photos. USB Cable (supplied) NOTES • Power the camcorder using the compact power adapter and only then connect it to the computer using the supplied USB cable in the following cases. - To write back scenes recorded with this camcorder that were previously saved on a computer. - To transfer music files from the supplied Camcorder Supplemental Disc in order to use them as background music. Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition connections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. Refer to Connection Diagrams (0 122) and select the most appropriate connection for your TV. On the TV, select as the video input the same terminal to which you connected the camcorder. Refer to the instruction manual of the connected TV. 124 External Connections 4 Turn on the camcorder and set it to Play back the movies or photos. NOTES or mode. • To correctly play back movies recorded with x. v. Color (0 156) on an HDTV compatible with this standard, additional settings may be required on the connected HDTV. Refer to the TV’s instruction manual. • We recommend powering the camcorder using the compact power adapter. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]