User manual CANON PC920 BROCHURE

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] • The picture will change immediately according to the adjustment. To select the effect level of the other cinema-look filters 1 Touch [5] to open the adjustment screen. 2 Touch [L] (low), [M] (medium) or [H] (high). 3 Touch [f] and then touch [OK]. CINEMA Mode and Cinema-Look Filters Options ( Default value) The camcorder offers 9 cinema-look filters. Select the desired filter while previewing the effect on the screen. 102 [1: Cinema Standard] [2: Vivid] [3: Dream] [4: Cool] [5: Nostalgic] [6: Sepia] [7: Old Movies] [8: Memory] [9: Dramatic B&W] AFilter number (will appear on the control button) BFilter name CPreview the effect on the screen DSelect the effect level EBrief description (onscreen guidance) NOTES • Photos cannot be recorded while the camcorder is set to mode. • When recording in mode, the 8 [Frame Rate] setting will be set to [E PF24]. Adding Decorations Adding Decorations Using the decoration function, you can add various graphical elements to the picture, such as stamps, watermarks, the date/time, and even your own freehand drawings. Freehand drawings can help emphasize a portion of the picture to attract viewers' attention. The supplied stylus pen will be especially useful for adding decorations. You can decorate scenes as they are being recorded, during playback or just before converting them to standard definition. 103 Decorating Scenes while Recording Operating modes: 1 Open the decoration screen. [FUNC. ] [ Decoration] • The decoration screen will open automatically also when you stow the LCD panel with the touch screen facing out. 2 Use a tool from the toolbar as explained in the following procedures. 3 Press g to record movies with your decorations. • You can add decorations even while recording a scene. 4 Touch [a] to exit the decoration screen. Adding Decorations 104 ACanvas - The area where you will draw and see your decorations in action. Pens and Stamps] Select the type of pen or stamp and its color. You can also C[ save a canvas or load a previously saved canvas. You can also drag the animated stamp to a different location. 105 To use [Captions] 1 Touch [ ]. • The [Captions] screen will appear. • When recording a scene using Story Creator, you can also select [Title] (the story’s title) or [Story Scene] (the story scene category). 3 Select the desired text settings and touch [f]. • Touch [ ] (white text on dark background), [ ] (white text) or [ • The selected caption will appear in the center of the screen. 4 Touch the caption and drag it to the desired location. ] (black text). To use image mix 1 Open the [Select Image] screen. [ ] [ON] 2 Touch [+] or [-] to select a different image mix frame. • You can touch one of the memory icons at the bottom of the screen to read image mix frames saved on a different memory. 3 Touch [f] to mix the selected frame with the live video. Adding Decorations Mixing Your Own Images with Live Video You can use images you make on your computer for the image mix (Chroma Key) function. Make sure that the image you want to use has a blue or green area, which will be replaced by the live video using Chroma Key mixing. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]