User manual CANON PIXMA MP250

[. . . ] Open it when printing or copying. (9) Alarm lamp Lights or flashes orange when an error occurs, such as paper-out or ink-out. (10) Wi-Fi lamp Lights or flashes blue to indicate the wireless LAN status. Lights: Wireless LAN active is selected. Flashes: Printing or scanning over wireless LAN. Also flashes while searching for wireless LAN access point during setup and when connecting to the access point. (11) ON button Turns the power on or off. [. . . ] In the View & Use window, select image/PDF files and click PDF. Click Create/Edit PDF file on the list. Creating/Editing PDF Files 3. Edit files in the Create/Edit PDF file window, then click Save Selected Pages or Save All Pages. The Save as PDF file dialog box opens. 4. Select the Password security settings checkbox. The Password Security -Settings dialog box opens. Note You can also open the Password Security -Settings dialog box by clicking Set. . . , then selecting Password Security for Security in the PDF Settings dialog box. 2. Select the Require a password to open the document or Use a password to restrict printing and editing of the document and its security settings checkbox, then enter a password. Setting Passwords for PDF Files Page 550 of 1037 pages Important Up to 32 single-byte alphanumeric characters can be used for the password. Select both checkboxes to set both Document Open Password and Permissions Password. You cannot use the same password for both. 3. Click OK. The Confirm Document Open Password or Confirm Permissions Password dialog box opens. Document Open Password Permissions Password 4. Re-enter the password and click OK. The Save as PDF file dialog box returns. Important If you close the Save as PDF file dialog box without clicking Save, the settings in the Password Security -Settings dialog box will be deleted. Passwords are deleted once the file is edited. Reset the passwords when saving edited files. Note If you set the passwords via the PDF Settings dialog box, the PDF Settings dialog box returns. at one time by simply clicking the corresponding icon. Custom Scan with One-click Tab (Switch Mode) Switches to One-click Mode screen. In the One-click Mode screen, you can complete "from scanning to saving", etc. at one time by simply clicking the corresponding icon. One-click Mode Screen Show this window at startup Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used screen appears. Preferences The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions. Preferences Dialog Box (Guide) Opens this guide. Navigation Mode Screen Page top Page 557 of 1037 pages Scan/Import Documents or Images Tab Page 558 of 1037 pages Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan/ Import Documents or Images Tab S702 Scan/Import Documents or Images Tab Select Scan/Import in the Navigation Mode screen to display the Scan/Import Documents or Images tab. You can scan photos and documents, or import images saved on memory cards. Auto Scan Opens the Scan/Import window with Auto Scan selected. Scan documents easily by automatically detecting the document type. Auto Scan Screen (Scan/Import Window) Photos/Documents (Platen) Opens the Scan/Import window with Photos/Documents (Platen) selected. Scan photos and documents placed on the Platen. [. . . ] IPv4 uses 32-bit addresses and IPv6 uses 128-bit addresses. K Key Format Select either ASCII or Hex as the WEP key format. The character that can be used for the WEP key differs depending on the selected key formats. ASCII Specify with a 5 or 13-character string that can include alphanumeric and underscore "_" characters. Hex Specify a 10-digit or 26-digit string that can contain hexadecimal (0 to 9, A to F, and a to f). Key Length Length of the WEP key. Longer key length allows you to set a more complex WEP key. L Link Quality The status of connection between the access point and the printer excluding noise (interference) is indicated with a value from 0 to 100%. LLTD A Link Layer protocol built in Windows 7 or Windows Vista for network topology discovery and quality of service diagnostics. [. . . ]