User manual CANON PLANETPRESS SUITE BROCHURE

[. . . ] Be sure to read these Instruction Manual to familiarize yourself with the features and proper operation of this camera. Using CF cards made by Canon is recommended. Radio and Television Interference (VCCI Statement) This camera is an information technology device that does not exceed Class B limits for electromagnetic interference (EMI) in compliance with standards set by Japan's Voluntary Control Council for Interference by Information Technology Equipment (VCCI). This device may still cause interference with radio or television reception when placed near such an appliance. Read these Instruction Manual to learn how to avoid reception interference of other appliances. Test the Camera Before Shooting Before using the camera, be sure to test it first. [. . . ] Turn the · If the >30" shutter speed blinks, it indicatesf/number) until the shutter dial to set a larger aperture (lower < speed stops blinking. the · If the >8000 shutteraspeed blinks, it indicates overexposure. Turnshutter dial to set smaller aperture (higher f/number) until the < speed stops blinking. feature. · C. Fn-16 enables the safety shiftobtained (p. 137) If a correct exposure cannot be in the aperture-priority AE mode with · · any shutter speed set by the camera, the camera automatically sets a larger or smaller aperture. C. Fn-06 enables the aperture to be set in full-stop or 1/2-stop increments instead of the standard 1/3-stop increments. (p. 134) For aperture-priority AE, C. Fn-05-2/3 enables the aperture to be set with the camera even while the lens is detached. (p. 134) 5 Exposure Control Depth-of-field Preview The depth of field is the range of acceptable focus in front of and behind the point of focus. (p. 156) The depth of field changes depending on the aperture. Press the depth-of-field preview button to stop down the aperture and see the range of acceptable focus in the viewfinder. preview button AE lock. · Pressing the depth-of-field button does notalso sets during AF operation. The depth-of-field preview function · 87 Depth-of-field AE This mode is effective when you want a wide depth of field to keep everything in focus near and far. DEP stands for "depth of field. " This mode will not work if · lens focus mode switch tothe lens focus mode switch is set to < < >. On the right of the viewfinder, the exposure level indicator < > indicates the current exposure level relative to the standard exposure index. 90 Manual Exposure Exposure level indicator 5 6 Refer to the exposure level indicator and set the shutter speed and aperture to obtain the desired exposure level. Standard exposure index Exposure level mark Take the picture. 5 Exposure Control the functions > dial and < > · C. Fn-05 can reverseshutter speed of the <aperture increments dial. (p. 134) half the and/or to full stops or · C. Fn-06 can set the standard 1/3 stops. (p. 134) stops instead of · C. Fn-05-2/3 enables the aperture to be set manually even when the lens has been detached. (p. 134) 91 Setting Exposure Compensation The exposure compensation amount you set will be effective until it is canceled manually. To cancel the exposure compensation amount, turn the < > to set the exposure compensation amount to 0, according to procedure 3 on this page. Exposure compensation is used to alter the camera's standard exposure setting. To set the exposure compensation amount, you can either turn the < > dial while looking through the viewfinder or press the < > button and turn the < > dial while looking at the LCD panel. The exposure compensation amount can be set up to +/­3 stops in 1/3-stop increments. Exposure Compensation with the < > Dial >. 1 2 Set the < > switch to < Focus the subject and check the exposure level. Exposure level indicator Standard exposure index 3 Increased exposure Turn the < > dial to set the desired exposure compensation amount. s · · Decreased exposure · 92 The exposure compensation icon < > and the exposure level indicator < > will be displayed in the viewfinder, while the exposure level indicator < > will be displayed on the LCD panel. Turn the < > dial while pressing the shutter button halfway or within ( ) after releasing the shutter button. On the viewfinder's exposure level scale, any position above the standard exposure index indicates increased exposure and any position below it indicates decreased exposure. On the LCD panel, any position on the + side indicates increased exposure and any position on the ­ side indicates decreased exposure. [. . . ] 146 - clearing and resetting . . . . . . . . . . . . . . . . . . . . . . 145 personal white balance . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 processing parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]