User manual CANON POWERSHOT ELPH 150 IS BROCHURE

[. . . ] Setting can only be selected for the first image. (Shaded Area) Setting remains in effect even when the camera is turned off. The default for the settings changed by the menu and button operations can be restored all at once except for [Date/Time], [Language] and [Video System] (p. (1) (2) (3) (4) (5) (6) Selectable only in manual focus. [. . . ] The camera evaluates the complex lighting conditions, such as the position of the subject, the brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. Spot AE Point Center AF Point Meters the area within the spot AE point frame at the center of the LCD monitor. Meters the spot AF point corresponding to the AF frame. button to turn on the LCD monitor. to select the metering · Each press of the button changes the metering mode as follows. (Evaluative Light Metering) (Center-Weighted Averaging) (Spot AE Point) · The icon of the currently selected light metering mode appears on the display panel. It also appears on the LCD monitor if it is on. If you have selected If you have selected (Evaluative Light Metering) or (CenterWeighted Averaging), go to step 5. 83 Shooting - Selecting Particular Effects Center-Weighted Averaging Averages the exposure from the entire image, but places more weight on the subject at the center. Use this mode when the subject is backlit or surrounded by bright light. Switching between Light Metering Modes (continued) In the 3 Point]. [ (Rec. )] menu, select [Spot AE See Selecting Menus and Settings (p. 42). the 4 Selectpress[Center] or [AF Point] option, then the button. When [Spot AE Point] is set to [Center], the spot AE point frame appears at the center of the LCD monitor, and when [Spot AE Point] is set to [AF Point], it appears inside the AF frame. e. g. Center Spot AE Point Frame 5 Shoot the image. 84 Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 208). Adjusting the Exposure Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background. 1 Press (C on the omni selector). The exposure compensation bar will appear in the display panel. The bar will also appear in the LCD monitor if it is on. · The settings can be adjusted in 1/3 steps in the range of -2EV to +2EV. mode, preset the white · Since the white balance data cannot be read in mode. balance in another shooting mode first before selecting · Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. Especially the following should not be changed. ­ Flash Setting the flash to on or off is recommended. If the flash fires when reading or , make sure that you also the white balance data with the flash set to use the flash when you shoot. ­ ISO Speed · The custom white balance setting is not cancelled even if settings are reset to default settings (p. 168). 88 Changing the Photo Effect You can shoot with different photo effects. / / / / Photo Effect Off Records with no effect. Vivid Neutral Emphasizes the contrast and color saturation to record in bold color. Tones down the contrast and color saturation to record neutral hues. Low Sharpening Records subjects with softened outlines. Sepia B/W Custom Effect / / / Records in sepia tones. Records in black and white. You can freely set the contrast, sharpness and color saturation. 1 Press the button to turn the LCD monitor on. Photo Effect settings can be changed even if the LCD monitor is off. However, the Custom Effect settings cannot be changed. 2 Press the button. [. . . ] 10 g (0. 4 oz. ) Battery Charger CG-570 (Optional) Input voltage: DC 8. 4V (when CA-570 used) DC 9. 5 V (when CA-560 used) DC 12/24 V (when automotive battery used) DC 2. 5 A (when charging the battery pack) DC 8. 4 V 1. 45 A 250 V / 4 A 0 - 40º C (32 - 104º F) 93 x 36 x 73 mm (3. 7 x 1. 4 x 2. 9 in. ) Approx. 130 g (4. 6 oz. ) Input current: Nominal output: Fuse: Operating temperatures: Dimensions: Weight: 198 Charge Adapter / Car Battery Cable Kit CR-560 (Optional) · Charge Adapter CG-560 Input voltage: Input current: Nominal output: Operating temperatures: Dimensions: Weight: · Car Battery Cable CB-560 Supported vehicles: Fuse: Length: Weight: DC 9. 5 V (when CA-560 used) DC 12/24 V (when automotive battery used) DC 2. 5 A (when charging the battery pack) DC 8. 4 V 1. 6 A (when charging the battery pack) DC 9. 5 1. 5 A (as an adapter) 0 - 40º C (32 - 104º F) 93 x 36 x 71 mm (3. 7 x 1. 4 x 2. 8 in. ) Approx. 140 g (5. 0 oz. ) Cigarette lighter socket powered by a negative ground, DC 12 V or 24 V car battery 125 V / 4 A Approx. 80 g (2. 8 oz. ) Wide Converter WC-DC58N (Optional) Magnification: Focal length: Lens configuration: Focusing range (from tip of lens): Thread diameter: Dimensions: Weight: Approx. [. . . ]