User manual CANON POWERSHOT SD980 IS BROCHURE

[. . . ] You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. * SD stands for Secure Digital, a copyright protection system. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). [. . . ] 11). Magnifying Images 1 Press the zoom lever toward will display and a magnified portion of the image will display. Images can be magnified up to a factor of approximately 10x. . Approximate Location of the Displayed Area 2 Use the , , or around the image. button to move If you press the FUNC. /SET button while in magnified display, the camera switches to image advance mode and will display. You can use the or button to advance to the next or previous image at the same level of magnification. The image advance mode is cancelled when you press the FUNC. /SET button again. You can change the magnification level with the zoom lever. To Cancel the Magnified Display Press the zoom lever toward . (You can also cancel it immediately by pressing the MENU button. ) Movie frames and index playback images cannot be magnified. 72 Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward Up to nine images can be viewed at once in index playback. Use the , , or button to change the image selection. . Selected Image Movie Switching between Sets of Nine Images Playback/Erasing The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images. Use the or button to move to the previous or next set of 9 images. Hold the FUNC. /SET button down and press the or button to jump to the first or last set. To Return to Single Image Playback Press the zoom lever toward . Jump Bar 73 Jumping to Images When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images. 78 Attaching Sound Memos to Images In playback mode (including single image playback and index playback), you can attach sound memos (up to 1 min. ) to an image. The sound data is saved in the WAVE format. 1 (Play) Menu . See Menus and Settings (p. 23). 2 3 Use the or button to select an image to which to attach a sound memo and press . Playback/Erasing The sound memo control panel will display. Select (Record) and press . The elapsed time and the remaining time display. Pressing the FUNC. /SET button pauses the recording. of recordings can be added to any one image. Sound Memo Panel Elapsed Time/ Remaining Time Volume (Adjust it with the or button) 79 Sound Memo Panel Exit Record Pause Play Erase Select [Erase] in the confirmation screen and press the FUNC. / SET button. You cannot attach sound memos to movies. Sound memos for protected images cannot be erased. Automated Playback (Auto Play) Use this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximately 3 seconds. 1 (Play) Menu . See Menus and Settings (p. 23). 2 Press . During automated playback, the following functions are possible: - Pausing/resuming the Auto Play: Press the FUNC. /SET button - Fast forwarding/rewinding: Press the or button (hold down the button to switch between images more rapidly) - Stopping the Auto Play: Press the MENU button 80 Protecting Images You can protect important images and movies from accidental erasure. 1 (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image to protect and press . Pressing the FUNC. /SET button again cancels the setting. You can also protect images in the index playback mode. Playback/Erasing Protection Icon 81 Erasing All Images Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. [. . . ] · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. [. . . ]