User manual CANON RAD DSC 2H2010 BROCHURE

[. . . ] For Users in the UK When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. SHOULD READ THIS BEFORE USING THIS PRODUCT. CHANGING THE FUSE THE MAINS LEAD ON THIS PRODUCT IS FITTED WITH A NON-REWIREABLE (MOULDED) PLUG, INCORPORATING A 3 AMP FUSE. SHOULD THE FUSE NEED TO BE REPLACED AN ASTA OR BSI APPROVED BS1362 FUSE OF THE SAME RATING MUST BE USED. [. . . ] If there are non-recorded portions or portions recorded in a mode other than SP mode on the tape, recording will stop. The playback tape: Use only tapes without non-recorded portions. If there are non-recorded portions or changes in the recording mode, you may not be able to insert AV correctly. You cannot insert AV in the following cases: · The playback tape has been poorly recorded. · During special playback: fast forward playback, rewind playback or slow playback etc. (analog only). TV: You cannot insert AV from a TV program with anomalous synchronized signals, such as when the program itself received poor signals. Editing Example recording from a VCR 1. Prepare the VCR and TV. · Set the TV/Video selector on the televison to Video. For further details, see "Connections for Playback on a TV Screen" on p. · Turn on the VCR and load a recorded cassette. · See TV and VCR instruction manuals for details. 3. Turn the camcorder's POWER switch to PLAY (VCR) and load a recorded cassette. · Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position). 4. Move the camcorder's TAPE/CARD switch to TAPE. 98 Editing 1. Locate the point where you wish to start audio dubbing, then press the PAUSE button. · You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. · The camcorder becomes set to playback pause mode. CA M (V CR) E RA O FF PL A Y AUDIO DUB. PAUSE AV INSERT AV DV Editing AUDIO DUB. ··AUDIO IN 101 5. Press the PAUSE button (and start play on the other audio device if AUDIO IN). · Audio dubbing starts. · Direct your voice into the microphone. When you get to the point where you wish to stop dubbing, press the STOP button (and then stop play on the other audio device if AUDIO IN). · Audio dubbing stops and AUDIO DUB. · The camcorder returns to stop mode. · You can also set zero set memory ( 88) at the place you want to stop audio dubbing, then every time you return to that position, audio dubbing will cancel. · If instead of pressing STOP you press PAUSE, the camcorder will return to the playback pause mode. Notes: · You cannot use the DV terminal while adding sound. · You might want to adjust the audio mix ( 103) when playing back a tape with added sound. [. . . ] Set the paper option in the style setting to a paper size that can be used with the printer. Media Type Error 180 Additional Information Specifications MVX2i Power Supply (rated): Power Consumption (while recording with the AF turned on): Television system: Video recording system: 7. 4 V DC 3. 9 W (Using viewfinder), 4. 8 W (Using LCD screen) E Audio recording system: Image sensor: Tape format: Tape speed: Maximum recording time (with an 80 min. cassette): Fast forward/ rewind time: Lens: Focusing system: Minimum focusing distance: Maximum shutter speed: Minimum illumination: Recommended illumination: Filter diameter: Viewfinder: LCD screen: Microphone: Recording media: Number of recording pixels: CCIR standard (625 lines, 50 fields) PAL colour signal 2 rotary heads, helical scanning DV system (Consumer digital VCR SD system) Digital component recording Tape: PCM digital sound 16 bit (48kHz/2ch), 12 bit (32kHz/4ch) Card: PCM digital sound 16 bit (16 kHz/1ch) 1/4" CCD (charge coupled device), approx. 1, 230, 000 effective pixels, tape: approx. 1, 000, 000 effective pixels) Videocassettes bearing the D mark. [. . . ]