User manual CANON REALIS SX7 MARK II D BROCHURE

[. . . ] Turn on the projector. P35-38 Connect the power cord and turn on the projector. Adjust the height of the projecting image (P38). Select a display language when turning on the projector for the first time (P36). 4. Set up the computer. Turn on the computer and set the resolution. P39-40 5. [. . . ] "Auto focus", "Auto keystone", and "Auto input" are enabled in the factory. You can manually set or adjust each function. You can set or adjust a specific function independently if you press the [AUTO SET] button during the manual adjustment. Select [Greenboard] from [Screen color] when using a greenboard (dark green) as a screen (P86). The auto focusing and the screen color correction may not be performed properly depending on the brightness of the room or the condition of the screen. Adjust the image manually if such is the case. PROJECTING AN IMAGE FROM AV EQUIPMENT 1 Select [DIGITAL VIDEO]. Perform the steps shown in the "Selecting DIGITAL VIDEO" section on page 61 before performing the auto setup if you want to project a digital content video image. Skip this step if [DIGITAL VIDEO] has been selected at the previous projection. The [Auto setup] window appears. 2 60 3 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. You can perform this step by selecting [OK] with the [<] button, and then pressing the [OK] button. Selecting an Input Signal Select [DIGITAL VIDEO] among the following 4 input signals by following the steps shown in the "Selecting DIGITAL VIDEO" section below if you want to project a digital content video image. DIGITAL VIDEO : Digital signal Connecting with an HDMI/DVI cable or DVI digital cable COMPONENT : Component signal Connecting with a supplied component cable SCART : SCART signal Connecting with a supplied SCART cable VIDEO : Video signal Connecting with a video cable S-VIDEO : S-VIDEO Connecting with an S-Video cable PROJECTING AN IMAGE FROM AV EQUIPMENT The component, video, and S-VIDEO signals are automatically set if a cable is connected and the input signal is confirmed. A LED (green) on a terminal flashes when an input signal is confirmed. Adjusting the Volume Volume bar appears on the screen. USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION The "FREEZE" message is shown on the screen. Canceling the FREEZE function Press the button again to cancel the FREEZE function. You can expand or reduce the frozen image (P69). The (left and right) LED illumination lamps on the top control flushes slowly while stopping the image. A guiding message appears if you press an invalid button while the FREEZE function is on. Adjust the volume or mute setting on the computer if the volume level is too low. 67 Showing the Elapsed Time Pointing with a Spotlight Useful when: You want to manage the proceedings of the presentation. The elapsed time from 00:00 to 59:59 is displayed at the lower right corner of the screen. Useful when: You want to point to a portion of an image that should draw attendees' attention. Highlight a desired portion of the projected image with a spotlight. USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Starting the Countdown Showing the Spotlight Press this button once to display the timer and start counting. Stopping the Countdown Press the countdown. button again to stop the A spotlight appears at the center of the screen and the image becomes dark except for the spotlight. Press the button repeatedly to change the shape of the spotlight. Moving the Spotlight Canceling the Countdown Press the timer. button again to disappear the Move the spotlight to a desired position. [. . . ] 52, 64 Screen size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Signal type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 SPOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]