User manual CANON REALIS WUX5000 PRO AV BROCHURE

[. . . ] Exiting the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Main Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Projector Group List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. 4. 1 About Projector Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 4, 1. 3 Installing the Software) Configure the protocol settings and the polling interval settings for discovery. 5, 1. 4 Configuring the Network Settings of the Software) 3 CHAPTER 1 • Introduction 1111 System Requirements To install this software on a computer, following requirements must be met. Category OS Supported Languages CPU Memory Display . NET Framework Essential Requirements Microsoft Windows XP Professional SP2 or later, Microsoft Windows Vista Ultimate Japanese, English Intel Pentium 4 2. 4 GHz or better 1 GB or more XGA or more Windows XP: . NET Framework 2. 0 SP1 or more Windows Vista : . NET Framework 3. 0 or more 1111 Installing the Software Install this software with the following procedures. You must have authorization as a Computer Administrator to install programs. 11 Run the installer for this software. 22 Follow the instructions provided by the installer to proceed with the installation. During installation, be sure to register this software in Windows Firewall to allow communication with the projector. Click [OK] if the following dialog displays. Note -- If . NET Framework version error displays, stop the installation. Install the latest version of . NET Framework using Windows Update, and then reinstall this software. -- To uninstall this software, click the Windows [Start] menu, select [Control Panel], and [Add or Remove Programs]. Select the name of this software in the list, and click [Remove]. 4 CHAPTER 1 • Introduction 1111 Configuring the Network Settings of the Software When installation of this software is complete, run the software and configure the discovery settings of the network for discovery. 111111 Starting the Software 11 Click the Windows [Start] menu and select [All Programs], followed by [Projector Monitoring Software] and [Projector Monitoring Software]. Main screen of this software will display. 111111 Configuring the Discovery Settings Configure the network range for discovering projectors. Methods vary depending on "SNMP V1/V2c/V3" and "LV Series". Configure each protocols respectively. ■■ For SNMP V1/V2c/V3 When using "SNMP V1" / "SNMP V2c" / "SNMP V3", you can specify a broadcast address or IP address range for discovery. -- To delete an unnecessary IP address, select an item from the discovery range list and click [Delete]. 9 CHAPTER 1 • Introduction 111111 Configuring the Polling Interval Settings Default polling interval for this software is set to "Not specified" for discovering projectors, and "1 hour" for receiving status of the projector. Change the polling interval with the following procedures. 11 Select [Polling interval settings] from the [Option] menu. [Polling interval settings] dialog will display. 22 Select a polling interval from the pop-up menu beside [Get projector status every] and [Discover projector every], and click [OK]. Category Get projector status every Description Select a polling interval from "10 minutes/15 minutes/30 minutes/1 hour/Not specified", for receiving status of the projector. If "Not specified" is chosen, poll manually with [Refresh projector status] from the [View] menu. Select a polling interval from "1 hour/2 hour/3 hour/6 hour/12 hour/24 hour/Not specified", for discovering new projectors. If "Not specified" is chosen, poll manually with [Discover projector] from the [View] menu. Discover projector every Note -- Settings will be cancelled if [X] (Close) or [Cancel] button is clicked before clicking the [OK] button. 10 CHAPTER 2 • Routine Operation CCCCCCCCCC Routine Operation 2222 Running the Software Run this software with the following procedures. 11 Click the Windows [Start] menu and select [All Programs], followed by [Projector Monitoring Software] and [Projector Monitoring Software]. The main screen displaying projector groups and information of recognized projectors will display. 2222 Exiting the Software Exit this software with the following procedures. 11 Select [Exit] from the [Group] menu. Informations of projectors and groups are saved and the software will exit. Note -- You can also exit the software by clicking the [X] (close) button on the window's upper right, or by pressing the [Alt] + [F4] keys simultaneously. 11 CHAPTER 2 • Routine Operation 2222 Main Screen The main screen displays the following information. For operating procedures, see referring pages for details. 13) Status bar Name Menu bar Projector group list Displays the function menu. Description Displays projector groups. Select a group from the list to display information of corresponding projectors in the Projector list. Displays icons indicating conditions of the projector, names, configuration informations, and maintenance informations. Icons indicate the following conditions: : Disconnect : Power off : Power on : Warning Sort the list in ascending or descending order by clicking the category. Choose whether to show or hide a category by right-clicking the category. Projector list Status bar Displays the number of projectors and processing status of the software. 12 CHAPTER 2 • Routine Operation 2222 Using the Projector Group List 222222 About Projector Groups Projectors connected to the network can be managed in groups using this software. [. . . ] •• Confirm the IP address and/or network settings. •• Configure the SNMP settings of the projector if the projector is SNMP-compatible. See the instruction manual that came with the projector for SNMP configuration procedures. •• Confirm the IP address of the projector, and configure the Discovery settings. [. . . ]