User manual CANON SMARTBASE MP730 PHOTO

[. . . ] User's Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. ENG Copyright Copyright 2003 by Canon Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc. This equipment conforms with the essential requirements of EC Directive 1999/5/EC. We declare that this product conforms with the EMC requirements of EC Directive 1999/5/EC at nominal mains input 230 V, 50 Hz although the rated input of the product is 200 V240 V, 50/60 Hz. [. . . ] Please note that this setting does not restrict incoming calls or faxes. Chapter 8 8-11 Canceling restriction Follow this procedure to cancel restriction of your machine: 1 2 3 Press [Menu]. 2 3 Use [2] or [3] to select <USER DATA>. Press [OK]. USER DATA 1. TEL REGISTRATION 4 5 2 3 Use [2] or [3] to select <FAX SETTINGS>. Press [OK]. FAX SETTINGS 1. USER SETTINGS 6 7 2 3 Use [2] or [3] to select <TX SETTINGS>. Press [OK]. TX SETTINGS 1. ECM TX 8 9 2 3 Use [2] or [3] to select <UN/LOCK PHONE>. Press [OK]. UN/LOCK PHONE PASSWORD _ 10 11 Use the numeric keys to enter the four-digit password you registered when you enabled restriction. If you did not register a password, ignore this step. Press [OK] twice. LOCK PHONE ON 12 13 14 2 3 Use [2] or [3] to select <OFF>. Press [Stop/Reset]. Restriction of your machine is now disabled. Anyone can make calls or send faxes. NOTE If you entered a password, it will remain registered in your machine. 8-12 Sending faxes Chapter 8 Chapter 9 1 2 3 4 Receiving faxes Press [Fax]. Press [OK]. RECEIVE MODE FAX ONLY MODE Setting the receive mode Follow this procedure to set the receive mode: 2 3 Use [2] or [3] to select the receive mode: Select: <FAX ONLY MODE> to automatically receive faxes only. <MANUAL MODE> for the machine to ring for fax and voice calls. <ANS. MACHINE MODE> to receive faxes automatically and route voice calls to an answering machine connected to your machine. <FAX/TEL AUTO SW> to automatically switch between fax and voice calls. Faxes will be received automatically, and the machine will ring for voice calls. 9 Receiving faxes 5 Press [OK]. The receive mode will be displayed on the bottom left of the LCD. 27/12 2003 SAT 15:30 FaxOnly STANDARD Chapter 9 Receiving faxes 9-1 Receiving faxes automatically: FAX ONLY MODE Choose this mode if: you have a dedicated telephone line for fax use only. you only want to receive faxes automatically with your machine. You will need to: connect your machine to a dedicated telephone line ( set <FAX ONLY MODE> ( p. Set-Up Sheet). When you receive a fax call: The machine will receive the fax automatically. When you receive a voice call: You will not be able to answer the call. NOTE The machine does not ring when it receives a fax call. If you want it to ring, connect a telephone to your machine and enable the <INCOMING RING> setting ( p. You can also select the number of rings before the machine answers ( <RING COUNT>, p. 13-5). Receiving faxes manually: MANUAL MODE Choose this mode if: you only have one telephone line for both fax and telephone use. you receive mainly voice calls and sometimes faxes. You will need to: set <MANUAL MODE> ( p. [. . . ] 70 frames) Card: With borders, index (max. 15 frames) Plain paper: A4/Letter: With/without borders, index (max. 70 frames) Date printing Vivid photo printing DPOF function-compatible (Index printing, specified quantity, specified frames, date printing, image number printing) Print media Layout Features Copy specifications Copy speed Black & white: <B&W DRAFT> Approx. 22 pages/minute (A4 size) Color: <COLOR FAST> Approx. [. . . ]