User manual CANON VIXIA HF M52 BROCHURE

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The histogram will be displayed also immediately after taking a photo. Use the histogram as a reference to verify the correct exposure of the photo. ( 34) 102 Photos The area to the right of the histogram represents highlights and the left side represents shadows. A photo whose histogram skews to the right is relatively bright; while one whose histogram peaks to the left, is relatively dark. Pixel Count Shadows Highlights Capturing Photos from the Playback Scene You can capture a single photo or a series of photos from a previously recorded scene. The size of the captured photo(s) will be [MW 1920x1080] and it cannot be changed, but you can select the photo quality. ( 34) To select the photo capture settings FUNC. [ Menu] [Photo Capture from Video] [ Single Photo] or [ Photo Sequence] Continue from the same menu: [Photo Capture Quality] Desired photo quality* FUNC. * The number displayed at the bottom indicates the approximate number of photos that can be recorded with the current quality setting. To capture the photo(s) 1 Play back the scene containing the picture you want to capture. 2 Pause the playback at the point you want to capture. To capture a photo sequence, hold PHOTO pressed down. NOTES · The data code of the photos will reflect the date and time of recording of the original scene. · Photos captured from a scene with a lot of fast movement may be blurred. Photos 103 · Photos will be recorded on the memory selected for recording photos ( 42). ·[ Photo Sequence]: - Up to 100 photos can be captured at a time. - The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. NOTES · If there is not enough space on the memory card, as many photos as possible will be copied before stopping the operation. · If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy photos to the memory card. 106 Photos · You may not be able to copy photos that were not recorded with this camcorder. Other Functions You Can Use when Taking Photos You can also use the following functions. . . The following functions and features of the camcorder can be used either for shooting video or for taking photos. The way to set and use them was already explained in detail, so we refer you to the relevant page in the "Video" section. · Zoom ( 47) · Quick Start ( 48) · Recording programs ( 61, 63) · Mini video light ( 65) · Self timer ( 69) · Manual exposure adjustment and automatic backlight correction ( 70) · Manual focus adjustment ( 71) · Face detection ( 72) · White balance ( 73) · Image effects ( 75) · Digital effects ( 76) Photos 107 Printing Photos Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order ( 113). Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo. ( 34) Connecting the Camcorder to the Printer 1 Set the camcorder to mode, single photo view. You can select the photos in the built-in memory or on the memory card ( 52). Afterwards, move the zoom lever toward T to return to single photo view. [. . . ] The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada's option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The Equipment is used for commercial, professional or industrial purposes. [. . . ]