User manual CANON VIXIA HF R100 BROCHURE

[. . . ] TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HD Camcorder, HG10 A systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] · Move the green selection frame to the image you want to view. · You can also turn the control dial to run quickly through the index screens. 3 Press . The index screen closes and the selected image is displayed. 68 Magnifying Photos during Playback During playback, still images can be magnified up to 5 times. ( 24) Erasing a Single Image ( 24) 1 If the function guide does not appear on screen, press to display it. . 2 Press 3 Press 1 Press the T side of the zoom lever. · The image is magnified by 2 times and a frame appears indicating the position of the magnified area. · To further enlarge the image, press the T side of the zoom lever. To reduce the magnification to less than 2 times, press the W side of the zoom lever. · will appear for images that cannot be enlarged. to select . or and press to select [ERASE] Erasing All Images The following procedure will erase all the non-protected still images from the memory card (all images except those with the mark). ( FUNC. ( 26) 24) 2 Use the navigation buttons to move the frame to the part of the image you want to see enlarged. To cancel the magnification, press the W side of the zoom lever until the frame disappears. FUNC. MENU STILL IMG OPER. ERASE ALL IMAGES FUNC. YES Erasing Photos You can erase still images recorded on the memory card. IMPORTANT Be careful when erasing images. You can also set [AF AST LAMP] to [ OFF] so the assist lamp does not light up ( 46). - The camcorder may not be able to focus even if the AF-assist lamp is on. - The brightness of the AF-assist lamp could be an inconvenience. Consider turning it off in public places such as restaurants. · The built-in mini video light may be disabled automatically when you attach the optional VFL-1 Video Flash Light. To use the built-in mini video light, set the switch on the VFL-1 to OFF first. Continuous Shooting and Exposure Bracketing (Drive Mode) Take a series of pictures of a moving subject or record the same picture in 3 levels of exposure in order to choose later the picture you like the best. POINTS TO CHECK ( 24) Mode switch: P (except for the [ FIREWORKS] recording program). Options [ SINGLE] Default value Records a single still image. [ CONT. SHOOT. ] (Continuous Shooting), [ HISPEED CONT. SHOOT. ] (High-Speed Continuous Shooting) Captures a series of still images as long as you hold PHOTO pressed down. For the number of frames per second, refer to the sidebar on page 71. Maximum number of continuous shots Number of frames (shots) per second Normal speed High speed Using the flash 3 frames 5 frames 2. 1 frames Maximum number of continuous shots 60 images These figures are approximate and vary with the recording conditions and subjects. The actual number of frames per second will be lower when the shutter speed is 1/30 or slower. 71 Photos [ AEB] (Auto Exposure Bracketing) Automatic Focus Priority When the focus priority is activated, the camcorder records a still image only after the focus has been adjusted automatically. [. . . ] Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The Equipment is used for commercial, professional or industrial purposes. This limited warranty does not cover the cabinet (exterior finish) of the Equipment, media, nor does it apply to Equipment purchased outside Canada. [. . . ]