User manual CARRIER 50RQDOC

[. . . ] • Before you connect the product to the power outlet, make sure that the power voltage matches the value printed on the back of the product. Never connect the product to the power outlet if the voltage is different. • Never expose the remote control or batteries to rain, water, sunshine, or excessive heat. • Avoid force coming onto power plugs. [. . . ] To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. •• The type plate is located on the back of the product. Introduction With this system, you can: • enjoy audio from an iPod/iPhone or external device, • charge your iPod/iPhone, and • listen to FM radio stations. What's in the box Check and identify the contents of the package: a b c ORD7100 User Manual d e f g a Docking speaker b Remote control c User manual d VDE AC power cord e AC power cord for the U. K. f MP3 link cable g FM antenna EN 3 Overview of the system a b c f e d g h a SOURCE • Turn to select a source. • Turn to switch the system from standby mode to normal mode. b • Press to switch the system between standby mode and normal mode. • Turn to adjust the volume. i • In radio mode, press and hold to activate the automatic search for and storage of radio stations. • For a compatible iPod/iPhone, press to pause or resume music play. • For a compatible iPod/iPhone, press and hold to switch it to sleep mode, or press to wake it up. f PRESET • Turn to select a preset radio station. g AC MAIN~ • Connect to the AC power cord. c Dock for iPod/iPhone d LCD screen e • In radio mode, turn to search for a radio station manually. EN 4 h MP3-LINK • Connect to an external player by an MP3 link cable. i Socket for FM antenna • Connect to an FM antenna. 3 Connect the FM antenna and power cord 1 2 Connect the FM antenna to the product. Connect the AC power cord to the AC MAIN~ socket and then to the wall outlet. EN 5 4 Power on and select a source 5 Set the clock 1 2 In standby mode, press and hold the knob for two seconds. knob • To stop the search, press the again. Search for a radio station manually Turn the knob until the frequency of target radio station is displayed. 8 EN Store radio stations automatically Press and hold the knob until is displayed. »» After the search is complete, the first stored radio station is broadcast. • To tune to a stored radio station, turn the PRESET knob until its sequence number is displayed. 8 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. Store radio stations manually 1 2 3 4 5 Tune to the target radio station. »» PXX is displayed with XX blinking (XX indicates the sequence number). Turn the PRESET knob to select a sequence number. Repeat steps 1-4 to store more radio stations. • To overwrite a preset radio station, store another station with its sequence number. To tune to a stored radio station, turn the PRESET knob until its sequence number is displayed. 1 2 Switch the source to . 3 Connect the MP3 link cable between • the MP3-LINK socket on the back panel of this product, and • the headphone jack on the external device. Play audio on the external device (refer to its user manual). • EN 9 9 Adjust the volume Turn the knob. 10 Use the remote control During use, you can use the remote control to control play. Activate the battery For the first time use, pull the protective tab out from the battery compartment. Control play During play, follow the instructions below to control play. FM mode Buttons Functions / / PRESET +/- PROG To tune to a specific radio station, press repeatedly until its frequency is displayed. To tune to the previous or next strong radio station, press and hold to start scanning. To tune to a preset radio station, press repeatedly until its sequence number and frequency are displayed. [. . . ] Reduce the distance between the remote control and the system. Insert the battery with its polarity (+/– signs) aligned as indicated. Aim the remote control at the iR sensor on the front panel of the system. Increase the distance between the product and other electrical appliances. [. . . ]