User manual CARROM 750-31

[. . . ] Network User's Guide Indicates reference to the User's Guide or Network User's Guide which is on the CD-ROM we have supplied. Warning There are high voltage electrodes inside the printer. Before replacing internal parts, cleaning the printer or clearing a paper jam, make sure you have turned OFF the power switch and unplugged the AC power cord from the AC power outlet/socket. Do not handle the plug or AC power cord with wet hands. This constitutes an electric shock hazard. The fusing unit becomes extremely hot during operation. Wait until it has cooled down sufficiently before replacing consumable items. The fusing unit is marked with a caution label. [. . . ] The label shown below is attached in countries where it is needed. Caution for LAN connection Connect this product to a LAN connection that is not subjected to over voltages. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 LASER KLASSE 1 PRODUKT IT power system (For Norway only) This product is also designed for an IT power system with phase-to-phase voltage 230V. This printer has a Class 3B laser diode which produces invisible laser radiation in the scanner unit. You should not open the scanner unit under any circumstances. ☛ Caution: Use of controls or adjustments or performance of procedures other than those specified in this User’s Guide may result in hazardous radiation exposure. Geräuschemission / Acoustic noise emission (for Germany only) Lpa < 70 dB (A) DIN 45635-19-01-KL2 Wiring information (for UK) Important If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the original fuse. Never use a plug that does not have a cover. For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT ☛ Varoitus!Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Warning - This printer must be earthed. The wires in the mains lead are coloured in line with the following code: ☛ Varning Green and Yellow: Blue: Brown: Earth Neutral Live If in any doubt, call a qualified electrician. Internal laser radiation Maximum radiation power: 5 mW Wave length: 780 - 800 nm Laser class: Class IIIb (Accordance with 21 CFR Part 1040. 10) Class 3B (Accordance with IEC 60825) 3 ■ Getting Started Carton Components Printer 1 2 3 4 5 9 8 7 6 CD-ROM (including User's Guide) Quick Setup Guide 1 Control Panel 4 Front Cover 8 Face-down 2 Paper Stopper 5 Paper Tray Output Tray 3 Face-down Output 6 Top Cover 9 Paper Support Tray Extension 7 Back Cover OPC Belt Cartridge AC Power Cord Toner Cartridges (Black, Cyan, Magenta and Yellow)*1 Repacking Kit*2 Parts/Paper Jam Locator Label*3 Carton components may differ from one country to another. The power cord may be slightly different to the one in the diagram above, depending upon which country you bought the printer in. Save all packing materials and the printer carton. ■ The interface cable is not a standard accessory. Download the latest drivers and utilities for your printers, read the FAQs and troubleshooting tips, or learn about printer solutions. 2 Install Software Installs the printer driver and utilities. 3 Documentation View the printer’s User's Guide and Network User's Guide in PDF format. (Viewer included) 4 Maintenance Tutorial Instructional movie for printer maintenance. 5 On-Line Registration Register your product on-line. 6 Color PDF Print Samples View and print color PDF samples that where printed on a 750-31. For visually impaired users: Please see a HTML file, readme. html, on the supplied CD-ROM. Go to page 16 Windows® USB For USB Interface Cable Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Go to page 14 Step 2 Installing the Driver For USB Interface Cable Users 1. Installing the Driver and Connecting the Printer to your PC If the Found New Hardware Wizard appears on your PC, click the Cancel button. 4 Click Printer Driver. 1 Make sure the USB interface cable is NOT connected to the printer, and then begin installing the driver. If you have already connected the cable, remove it. A C C N L E 5 Click the Next button. Follow the on-screen instructions. 6 2 Select Standard Installation, and then click the Next button. Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 3 Click Install Software icon on the menu screen. If you want to install the PS driver, select Custom and then follow the on-screen instructions. When the Select Components screen appears, check PS Printer Driver, and then continue following the on-screen instructions. 14 7 Select Local Printer with USB cable, and then click the Next button. 2. Setting your Printer as the Default Printer (For Windows® 2000/XP Users Only) 1 Click Start and then Printers and Faxes. Windows® USB 8 When this screen appears, make sure the printer’s power switch is on. Connect the USB interface cable to your PC, and then connect it to the printer. Click the Next button. 2 Select the Brother 750-31 series icon. 3 From the File menu, select Set as Default printer. 9 Click the Finish button. Setup is now complete. If you want to register your product on-line, check On-Line Registration. Installing the Driver For Windows® 98 / Me users: Setup is now complete. [. . . ] BRAdmin Professional utility can also be used to manage devices from other manufacturers whose products support SNMP (Simple Network Management Protocol). For more information on BRAdmin Professional go to http://solutions. brother. com 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 3 Click For Administrators. 2 Click the Install Software icon on the menu screen. 4 Click BRAdmin Professional. The default password for the print server is 'access'. [. . . ]