User manual CARROM BOWL-A-MANIA

[. . . ] Push the four coloured ink cartridge covers one at a time so they pop up. Then remove the white shipping cover by pulling it toward you and then lifting it up and out. A. Check that the power is turned on (by plugging in the power cord). Open the control panel cover by pulling it toward you (1), then lift the top cover toward the back (2). [. . . ] If No. 5 is the best match, enter 1 (YES) to go to (YES)—OR— Do NOT select The LCD asks you if the print quality is OK for each colour. BLACK OK?1. YES 2. NO } } 600 DPI 1200 DPI If another test print number is a better match for either 600DPI or 1200DPI, enter 2 (NO) to select it. For 600DPI, enter the number of the test print that most closely matches the 0 sample (1-8). 600DPI ADJUST SELECT BEST # Press 2 (NO) for any colour with a problem. The LCD shows: START CLEANING?1. YES 2. NO Press 1 (YES), then MFC starts cleaning the colours. Mono Fax Start. The After cleaning is finished, press MFC starts printing PRINT QUALITY CHECK SHEET again and goes back to the first step of STEP A. For 1200DPI, enter the number of the test print that most closely matches the 0 sample (1-8). 1200DPI ADJUST SELECT BEST # Page 2 BOWL-A-MANIA Control Panel Navigation Keys You can print a list of basic operational steps by pressing Reports, 1 . * Access the Menu * Go to next menu level * Accept an option * Scroll through the current menu level * Back to previous menu level * Forward to next menu level * Exit the Menu 9 Select a Receive Mode 2 10 Set Date and Time 1 11 Set Station ID Choose the mode that best suits your needs. Press Menu/Set, , 1 , 2 . Your MFC displays the date and time, and prints it on every fax you send. Press Menu/Set, YEAR:XX You should store your name and fax number to be printed on all fax pages you send. Press Menu/Set, FAX: 1 or to select FAX ONLY, FAX/TEL, B. Press TAD:ANSWER MACH. , MANUAL mode, and press Menu/Set. Press Stop/Exit. FAX ONLY , 2 . , 3 . 2. DATE/TIME 3. STATION ID B. Please see Note*1. 5. Click Install. 6. The InstallShield Wizard Setup window will appear briefly, followed by the PaperPort® Setup window. Click Yes. 7. When the PaperPort® Setup window displays your Name and Company, either change or accept them, and then click Next. 8. When the Choose Destination Location window displays the path where the PaperPort® files will be installed, either change or accept, and then click Next. 9. When the Register Today screen appears, click Next. This is registration for PaperPort®. Follow the instructions. For Parallel For USB 10. When the MFC Software Suite Installation window appears, click Next to begin installing the MFC Software Suite. When the Setup Type window appears, select Standard, and then click Next. The application files will be copied to your computer. 12. The Connect Cable window will appear. *1 MFC Software Suite includes Printer Driver, Scanner Driver, ScanSoft™ PaperPort®, ScanSoft™ Text Bridge®, PC-FAX software, Remote Setup and True Type fonts. PaperPort® is a document management application for viewing scanned documents. ScanSoft™ TextBridge®, which is integrated into PaperPort®, is an OCR application that converts an image into text and inserts it into your default word processor package. *2 If an error message appears during the installation process, or you have previously installed MFC Software Suite or MFL Pro, you will first have to uninstall it. From the Start menu, select Programs, Brother, Brother MFL Pro, Uninstall, and then follow the instructions on the screen. *3 Even if you select NO, later you will be able to launch the Brother Control Centre to use the Scan to key. [. . . ] Step 5. Restart your Macintosh so it can recognize the new driver. Connect the Filter Core and Cable Tie to the USB cable. Connect the MFC to your Macintosh with the USB cable, and then turn on the MFC by plugging in the power cord. Step 1. Make sure your MFC power cord is unplugged and your Macintosh is turned on. Make sure you do NOT connect your MFC to your Macintosh Step 2. Insert the CD-ROM into your CDROM drive. 1. Installing MFC Software Suite When the window appears, doubleclick MFC Software Suite Installer. Step 6. Select your language Select the Printer. 1. From the Apple menu, open the Chooser. Click to MFL Pro Colour icon you installed. [. . . ]