User manual CARROM PROSTICK HOCKEY

[. . . ] ■ For Parallel use a shield interface cable that is IEEE 1284-compliant. ■ Use only a parallel interface cable or USB interface cable that is not longer than 1. 8 meters. Control Panel 9 8 7 6 1 1. Options key For more details, see Chapter 1 "PROSTICK HOCKEY control panel overview" in the User's Guide. Table of Contents Step 1 1. 9. Setting Up the machine Removing the Protective Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After cleaning is finished, press the Fax Start key. The machine starts printing PRINT QUALITY CHECK SHEET again and goes back to the first step of STEP A. Setting Up the machine 6 Colour Block Quality and Alignment Check When you have finished selecting the key (YES) or the key (NO) for each colour, the LCD shows: Step 1 Setting Up the machine Dial pad Menu/Set Receive Mode Fax/Start Stop/Exit 7 Selecting a Receive Mode Choose the mode which best suits your needs by pressing the Receive Mode key repeatedly. You connect an external telephone or external telephone answering machine to the machine. Yes No FAX ONLY The machine automatically answers every call as a fax. Yes FAX/TEL The machine controls the line and automatically answers every call. If the call is not a fax will ring for you to pick up the call. You use the voice message function of your external telephone answering machine. No You want the machine to answer fax calls only. No MANUAL You control the phone line and must answer every call yourself. EXTERNAL TAD Yes Your external answering machine (TAD) automatically answers every call. Voice messages are stored on the external TAD. For more details, see of Chapter 5 “Setup Receive” in User’s Guide. 8 8 Setting a Date and Time The machine displays the date and time, and prints it on every fax you send. 1 2 3 4 Press the Menu/Set key. key. STATION ID FAX:908XXXXXXXX 5 DATE/TIME YEAR:03 (e. g. Enter 0, 3 for 2003. ) STATION ID TEL:908XXXXXXXXX 5 Enter the two digits for the month on the dial pad, and then press the Menu/Set key. DATE/TIME MONTH:09 6 Use the dial pad to enter your name (up to 20 characters), and then press the Menu/Set key. STATION ID NAME:ANDY 6 Enter the two digits for the day on the dial pad, and then press the Menu/Set key. DATE/TIME DAY:06 Refer to the following chart for entering your name. Press key 2 3 4 5 6 7 8 9 One time A D G J M P T W Two times B E H K N Q U X Three times C F I L O R V Y Four times 2 3 4 5 6 S 8 Z (e. g. Enter 0, 6. ) 7 Enter the time in 24-hour format on the dial pad, and then press the Menu/Set key. DATE/TIME TIME:15:25 (e. g. Enter 1, 5, 2, 5 for 3:25 P. M. ) 8 For more details, see Chapter 4 “Setting the Station ID” in User's Guide. Press the Stop/Exit key. If you want to repeat from step1, press the Stop/Exit key. 7 Press the Stop/Exit key. If you want to repeat from step1, press the Stop/Exit key. 9 Setting Your Station ID You should store your name and fax number to be printed on all fax pages that you send. Go to Next page to install the driver 1 2 Press the Menu/Set key. Press the key. 9 Mac® OS X 10. 1/10. 2. 1 or greater Mac® OS 8. 5-9. 2 Windows NT® 4. 0 (e. g. A test page will be printed so you can check the print quality. Installing the Driver & Software . L It will take a few seconds for the installation screen to appear. The installation of the Brother driver will automatically start. Follow the instructions on the screen. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. I Select BRUSB: USB Printer Port, and then click Next. Continued 15 Step 2 Installing the Driver & Software For USB Interface Cable Users (For Windows® 98/98SE/Me/2000 Professional/XP) M Click Finish to restart your computer. N After the computer restarts, click Yes to have the Control Center loaded each time Windows is started. The Control Center will appear as an icon in the task tray. If you click No the Scan keys on the machine will be disabled. Even if you select NO, later you will be able to launch the Brother Control Center to use the Scan to key. See “AutoLoad the Brother Control Center”, Chapter 14 in the On-Line Documentation (User’s Guide) on the CD-ROM. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 16 For Windows® 2000 Professional Users Only H When this screen appears, turn on the machine by plugging in the power cord. Connect the USB interface cable to your PC, and then connect it to the machine. K Click Finish to restart your computer. L . . I It will take a few seconds for the installation screen to appear. The installation of the Brother driver will automatically start. If the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. Even if you select NO, later you will be able to launch the Brother Control Center to use the Scan to key. See “AutoLoad the Brother Control Center”, Chapter 14 in the On-Line Documentation (User’s Guide) on the CD-ROM. J . The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 17 Installing the Driver & Software After the computer restarts, click Yes to have the Control Center loaded each time Windows is started. [. . . ] The Control Center will appear as an icon in the task tray. If you click No the Scan keys on the machine will be disabled. F When Software License Agreement window appears, click Yes If you agree to it and go to next screen. Even if you select NO, later you will be able to launch the Brother Control Center to use the Scan to key. See “AutoLoad the Brother Control Center”, Chapter 14 in the On-Line Documentation (User’s Guide) on the CD-ROM. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 27 Windows NT® 4. 0 Setting Up the machine Step 2 Installing the Driver & Software For Mac® OS 8. 5 - 9. 2 Users Make sure that you have completed the instructions from Step 1 “Setting Up the machine”. 1 Unplug the machine from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 6 Connect the USB interface cable to your Macintosh®, and then connect it to the machine. 2 3 Turn on your Macintosh®. Insert the supplied CD-ROM into your CDROM drive. Do not connect the machine to a USB port on a keyboard or a non powered USB hub. 7 Turn on the machine by plugging in the power cord. 4 Double-click the MFC Software Suite Installer icon to install the printer and scanner drivers. 8 5 After the installation is completed, restart your Macintosh®. From the Apple® menu, open the Chooser. 28 9 Click the MFL Pro Color icon you installed. [. . . ]