Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CARVIN UX1000MC. We hope that this CARVIN UX1000MC user guide will be useful to you.
Lastmanuals help download the user guide CARVIN UX1000MC.
Detailed instructions for use are in the User's Guide.
[. . . ] SETTING FREQUENCY FREQUENCY DISPLAYED Press "SET" for three seconds for the "MHZ" to show on the LCD. Press "UP" or "DOWN" to increase or decrease the frequency. Re-press "SET" again and the mic will store the frequency. GROUP DISPLAYED Press "SET" for three seconds for the Group digit to show. [. . . ] Both the transmitter and receiver have 960 user selectable channels, which can be grouped into four groups. The receiver can be mounted in a standard 19" rack (1U) with use of the optional UX-DR adapter. The versatile UBP1000 belt-pack transmitter is designed for use with condenser microphones as well as Hi-Z instrument pickups. Please note that in multiple-system applications there must be one transmitter per receiver. GETTING STARTED QUICKLY If you're like most new owners, you're probably in a hurry to plug your wireless system in and use it. Here are some brief instructions to get you going quickly. With the wireless system unplugged and the unit turned off, complete the following procedures: 1. CHANNEL CHECK Check that both the transmitter and receiver are set to corresponding channel. If multiple systems are used, each system must be set to their own channel. OUTPUT CONNECTIONS There are two audio outputs on the back of the receiver: balanced XLR and unbalanced 1/4". Connect the appropriate cables for your system. POWER CONNECTIONS Connect the included AC adapter to the DC power input on the back of the receiver. Plug the adapter into a standard 120 volt 60 Hz AC power outlet. RECEIVER POWER ON Turn down the Volume control of the receiver as well as the mixer. The power indicator will light up even though the transmitter is not on. BELT PACK SETTINGS Connect the instrument cable or mic to the Belt-pack. Set the rear gain switch to -20 for mic or 0 for instrument use. Set the fine gain control to 12 o'clock. Reduce if distortion occurs.
For your records, record the following information. Serial No. _____________________ Invoice Date_______________
rev A
6. BATTERY Insert fresh AA alkaline batteries into the transmitter. TRANSMITTER POWER ON Switch the transmitter mic to the "on" position. [. . . ] Adjust the mic position to minimize air from hitting the mic. UX-LP1 LAVALIERE MIC Connect the Lavaliere mic cable to the transmitter's mini XLR input jack. For optimum sound, position the mic as close to the mouth with the top of the mic facing up. Test out various positions along the center of the chest to determine the ideal mic placement. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CARVIN UX1000MC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CARVIN UX1000MC will begin.
