User manual CASIO 4396

[. . . ] MO0804-EA Operation Guide 4380 4396 5048 About This Manual Module 4380 Module 4396 Module 5048 · The operational procedures for Modules 4380 , 4396 and 5048 are identical. All of the illustrations in this manual show Module 4380. · Button operations are indicated using the letters shown in the illustration. · For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. [. . . ] You can use the Recall Mode to view both lap and split time records. · When you enter the Recall Mode, the newest log recorded in the Stopwatch Mode will appear first. If there are no logs in memory, xxxx appears on the display. · You can use the Recall Mode to check memory data even while a stopwatch elapsed time measurement operation is in progress. However, the time data that is currently being measured will not appear in the Recall Mode. · You can convert a lap time saved in the Stopwatch Mode to a split time. To recall stopwatch time records 1. In the Stopwatch Mode, check to make sure that the displays reset to all zeros. · If all zeros are not displayed, reset the stopwatch. Use the A button to select either the lap time screen (to view lap time records) or the split time screen (to view split time records). · To convert a lap time saved in the Stopwatch Mode to a split time, select the split time screen. Press the C button to enter the Recall Mode. Use the A button to scroll through the log title screens from the newest to the oldest until the title screen of the log whose records you want to view is displayed. Press D to scroll through the records contained in the log you selected in step 4, from the oldest to the newest. First record Last record Lap time Log Title Screen Lap number Lap number L L To measure elapsed time with split times 1. When the stopwatch display shows all zeros, press A Lap time to display the split time screen (indicated by /SPL). Press D to start an elapsed time measurement. · All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C. Hours Seconds Minutes Auto-repeat on indicator 4. While a setting is flashing, use D (+) and B (­) to change it. · To set an alarm that does not include a month (daily alarm, monthly alarm), set x for the month. Use D and B until the x mark appears (between 12 and 1) while month setting is flashing. · To set an alarm that does not include a day (daily alarm, 1-month alarm), set xx for the day. Use D and B until the xx mark appears (between the end of the month and 1) while the day setting is flashing. · When setting the alarm time using the 12-hour format, take care to set the time correctly as a. m. [. . . ] When the setting you want to change is flashing, use B and D to change it as described below. Screen: To do this: Do this: Toggle between Daylight Saving Time (ON) and Standard Time (OF) Change the hour or minutes Press D. · The DST indicator on the Dual Time Mode screen indicates that DST is turned on for the Dual Time Mode time. 3 Operation Guide 4380 4396 5048 Illumination This watch has an EL (electro-luminescent) panel that cause the face of watch to glow for easy reading in the dark. · See "Illumination Precautions" for other important information about using illumination. To illuminate the face of the watch In any mode (except when a setting screen is on the display), press B to illuminate the face of the watch. · You can use the procedure below to select either 1. 5 seconds or 3 seconds as the illumination duration. [. . . ]