User manual CASIO CASSIOPEIA MPC-501

[. . . ] FIVA User's Guide (MPC-501 series) Thank you for purchasing the CASIO FIVA MPC-501. This guide describes the basic operations of the product. Read this guide in its entirely before handling or operating the product, and keep it close at hand so it can be easily referenced. International ENERGY STAR® Program As a member of the International ENERGY STAR® Program, CASIO products have been judged to meet International ENERGY STAR® standards. ENERGY STAR® is a U. S. registered mark. Power Plug and AC Adaptor Note AC cord plug and wall outlet illustrated in this User's Guide shows the two-pin plug type. [. . . ] · You can also use the stylus to write the text character you want directly into the As box. · No matter how you specify a character, the character in the As box will be associated with the ink pattern in the Trainer dialog box. Tap the Train button to train the character and save your changes to the Library of Models. Tap the close box to close the Trainer dialog box. Other Symbols If the character you want is not in the list, select Other from the list to open the Train Symbol dialog box. The Train Symbol dialog box provides a selection of non-standard and international symbols. Tap the character you want on the Train Symbol dialog box to select it, and then tap OK. The following functions are also available on the Trainer dialog box. · Tap the Undo button if you made a mistake and want to "untrain" the character. · Tap the Macro button when you want to train the selected ink pattern as a character string, macro, or gesture. Tapping Macro displays the Train Macro Wizard, which shows the selected ink pattern. See "Macros & Gestures" on page 57 for more information about this dialog box. 56 Note · If you open the Trainer dialog box while text is selected in a document, the selected text is automatically replaced by the newly trained character when you close the Trainer dialog box. Macros & Gestures This option opens the Train Macro Wizard dialog box with the last ink pattern you wrote or selected. Use this dialog box to teach smARTwriter to interpret the pattern as a character string, macro, or gesture. To teach smARTwriter a character string, macro, or gesture 1. Display the Train Macro Wizard dialog box by tapping the smARTwriter icon and then selecting Train Macros & Gestures. · The last ink pattern you drew is shown in the Draw Macro Ink box. 2 · You can use this pattern as it is, or you can replace it with another pattern by tapping the Clear Ink button and then drawing another ink pattern. When the ink pattern is the way you want, tap the Next button to continue. · To cancel training, tap the Cancel button. In response to the prompt that appears, tap New Macro if you are creating a new macro, or Existing Macro or Gesture to associate the ink pattern with an existing macro. What happens next depend on whether you selected New Macro or Existing Macro or Gesture in step 3 of the above procedure. In response to the prompt that appears, use the stylus to enter a name for the macro or gesture. The name you enter appears in the Enter Macro Name box. After you are finished, tap Next to continue. [. . . ] Therefore, it is favorable to use the product under the normal operation conditions. If the product is left above the normal operating conditions, it might be possible to affect to the reliability of the LSIs. 121 Specifications Model CPU CPU operating frequency/ Built-in Cache Memory Main Expanded Memory (RAM) ROM Video RAM Hard Disk (Built-in) Monitor Device Monitor Functions Resolution*1 Keyboard Input Touch Screen Device Memory Sound Functions Sound Functions MPC-501M62E MPC-501M63E MPC-501M63O National Semiconductor Geode (MediaGX) 200MHz/16KB 32MB 32/64MB (one expansion RAM slot, 96MB maximum total) 256KB (BIOS), supports plug and play 2. 5MB (UMA) 10GB 15GB 6. 7-inch HAST TFT color LCD (with backlight); touch panel screen SVGA (800 × 600 dots), 65, 536 colors 10-key pad; arrow keys; control keys Analog film resistor touch panel Monaural speaker (built-in); monaural microphone (builtin); PCM (Sound Blaster 16 compatible) sound source Monaural speaker (built-in) Monaural microphone (built-in) PCM (Sound Blaster 16 compatible) sound source USB, 1 channel IrDA1. 1 compliant infrared port (Data Transfer Rate: 4Mbps, 115. 2Kbps/ASK maximum) Built-in Communi- Modem (56kpbs receive, Serial cation Ports V. 90; FAX: 14. 4kbps) USB × 1 Interfaces External FDD × 1 With Port Serial (D-SUB 9-pin male) × 1 Replicator Parallel (D-SUB 25-pin female) × 1 (option) Video (mini D-SUB 15-pin female) × 1 PS/2 × 1 PC Card Slot Type II × 1 slot (Card Bus compliant) Power Management Auto or manual settings Timekeeping Clock battery backup Security Power on password 122 Type Approximate Operation Time Battery Charging Time Dimensions Weight Power by AC adaptor Dimensions with battery pack Approximate weight with battery pack Operating Environment Standard Pre-installed Software Applications Lithium ion battery (Rating: 11. 1V, 3000mAh) (corresponds to the MPC-174LBAT) 6 hours · Actual times depend on operating conditions and connected peripherals. Power Off: Approximately 4 hours 206(W) × 46(D) × 25(H) mm (8. 1"(W) × 1. 81"(D) × 0. 98"(H)) 320g 45W 16V AC adaptor (Input: 100 to 240V AC, 50/60Hz) 210(W) × 151(D) × 28(H) mm (8. 3"(W) × 5. 9"(D) × 1. 1"(H)) (excluding projections) 1020g (2. 24lbs) 1005g (2. 21lbs) Battery Pack (Included) Temperature: 5°C to 35°C (41°F to 95°F); Humidity: 30 to 90% (non-condensation) Microsoft® Windows® 98 Second Edition Mobile Cockpit, Quick Beam Suite None None *1 Resolution indicates the number of vertical and horizontal dots. Larger numbers indicate higher resolution, clearer images, and a larger display area. [. . . ]