User manual CASIO CTK-WK200 APPENDICE

[. . . ] If anything is missing, contact your original retailer. Digital camera Rechargeable lithium ion battery (NP-130) Charger unit (BC-130L) To attach the strap to the camera Attach strap here. * The shape of the power cord plug varies according to country or geographic area. Power cord Strap USB cable AV cable CD-ROM Basic Reference 2 Read this first! · The contents of this manual are subject to change without notice. · The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. [. . . ] Use [8] and [2] to select "Del Group Images" and then press [SET]. Use [8] and [2] to select "Yes", and then press [SET]. 103 Viewing Snapshots and Movies Dividing Up a CS Group Use the following to divide up a CS Group into individual images. . 5. While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU]. Use [4] and [6] to select the "PLAY" tab. Use [8] and [2] to select "Divide Group" and then press [6]. Use [4] and [6] to display the CS group you want to divide up. Use [8] and [2] to select "Divide" and then press [SET]. · To divide up other CS group files, repeat steps 4 and 5. . Dividing Up All CS Groups IMPORTANT! · Once a CS group is divided, it cannot be regrouped. 1. 5. While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU]. Use [4] and [6] to select the "PLAY" tab. Use [8] and [2] to select "Divide Group" and then press [6]. · Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV. 2. Turn on the TV and select its video input mode. If the TV has more than one video input, select the one where the camera is connected. 107 Viewing Snapshots and Movies 3. Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the camera's monitor screen. · Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the AV cable is connected. · You also can change the aspect ratio of the screen and the video output system (page 163). 4. Now you can display images and play back movies as you normally do. IMPORTANT! · Before connecting to a TV to display images, be sure to configure the camera's [r] (REC) and [p] (PLAY) buttons for "Power On" or "Power On/Off" (page 162). · Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required. NOTE · Audio is stereo. · Some TVs may not be able to output images and/or audio correctly. · All icons and indicators that appear on the monitor screen also appear on the TV screen. You can use [8] (DISP) to change the display contents. 108 Viewing Snapshots and Movies Viewing High-quality Movies on a Hi-Vision Television Use a commercially available HDMI cable to connect the camera to the TV. For information about playback, see the procedure starting from step 2 under "Viewing Snapshots and Movies on a TV Screen" on page 107. · Use a commercially available HDMI cable that is marked with the logo shown to the right. HDMI connector HDMI cable (commercially available) HDMI output (Mini) HDMI input HDMI mini connector Terminal cover IMPORTANT! · Output to a TV is not supported while the camera is in the REC mode. NOTE · Use a HDMI cable that with a plug that is compatible with the camera's HDMI mini connector on one end, and a plug that is compatible with your TV's HDMI connector on the other end. [. . . ] Before performing the following steps, you should record the background image (snapshot or movie) into which you want to insert the moving subject. · The term "built-in subjects" refers to the moving figures and characters that came pre-programmed in the camera's built-in memory. Background Image Built-in Subject Dynamic Photo Image 2 Dynamic Photo!A totally new way to enjoy digital photography! Creating a Dynamic Photo Image Your digital camera comes with a number of subjects in its built-in memory ("built-in subjects"). You can use these built-in subjects to create Dynamic Photo images by inserting them into your original snapshots or movies. Step 1: Shoot the image into which you want to insert an built-in subject. [. . . ]