User manual CASIO EX-Z2300

[. . . ] E Digital Camera User's Guide Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www. exilim. com/ To go to "Getting the Most Out of Dynamic Photo" click here! 1 Unpacking As you unpack your camera, check to make sure that all items shown below are included. [. . . ] 4. Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select "Paper Size", and then press [6]. Use [8] and [2] to select a paper size and then press [SET]. · The following are the available paper sizes. 3. 5"x5", 5"x7", 4"x6", A4, 8. 5"x11", By Printer · Selecting "By Printer" prints using a paper size selected on the printer. · See the documentation that comes with your printer for information about paper settings. 5. Use [8] and [2] to specify the print option you want. : Prints one image. Next, use [4] and [6] to select the image you want to print. With this option, images will be printed in accordance with DPOF settings (page 113). · To toggle date stamping on and off, press [BS]. The date stamp will be printed when "On" is indicated on the monitor screen. 1 Image 6. Use [8] and [2] to select "Print" and then press [SET]. Printing will start and the message "Busy. . . Please wait. . . " will appear on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any camera button will cause the printing status to re-appear. The print menu screen will reappear when printing is complete. · If you selected "1 Image", you can repeat the procedure from step 5, if you want. 7. After printing is complete, turn off the camera and disconnect the USB cable from the printer and camera. 112 Printing Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service. · Whether or not you will be able to use DPOF settings for printing depends on the printer you are using. · Some professional print services may not support DPOF. . Configuring DPOF Settings Individually for Each Image Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * Select images 1. 2. Use [4] and [6] to scroll through the files until the image you want to print is displayed. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. [. . . ] Use [8] and [2] to select the subject type you want and then press [SET]. 10 Creating a Dynamic Photo Image CS speed Moving Subject 1sec (20fps) Moving Subject 2sec (10fps) 20 frames per second 10 frames per second Number of images 20 images 20 images Subject type Creates a moving subject from the CS images. · The subject is cropped out of each of the CS images. · "Moving Subject 1sec (20fps)" provides smooth subject movement, but recording time is limited to one second. · "Moving Subject 4sec (5fps)" provides more recording time, but subject movement is slightly rough. [. . . ]