User manual CASIO EXILIM EX-Z90,MV

[. . . ] E Digital Camera User’s Guide Thank you for purchasing this CASIO product. € Before using it, be sure to read the precautions contained in this User’s Guide. € Keep the User’s Guide in a safe place for future reference. € For the most up-to-date information about this product, visit the official EXILIM Website at http://www. [. . . ] € When a copied image appears on the full-month calendar screen, it is displayed on the date that it was copied (page 90). 108 Other Playback Functions (PLAY) Dynamic Photo You can use the procedures in this section to crop either a moving subject or a still subject out of a snapshot and then insert it into another snapshot. Moving Subject Other Image Dynamic Photo Image To create a subject image to be inserted (Dynamic Photo) 1. Press [BS] and then select the “Dynamic Photo” scene. Press [SET], use [8] and [2] to select “Subject Type”, and then press [SET]. Use [8] and [2] to specify the subject type, and then press [SET]. CS speed Number of Shots 20 shots 20 shots 20 shots 1 shot Subject type Records multiple images of the subject, which are cropped and combined to create movement against the background image. Records a single subject, which is cropped and inserted into the background image. Moving Subject 1sec (20fps) Moving Subject 2sec (10fps) Moving Subject 4sec (5fps) Still Subject 20 images per second 10 images per second 5 images per second – • To create a still subject, select “Still Subject”. Press [SET], use [8] and [2] to select “Number of Shots”, and then press [SET]. Use [8] and [2] to select either “1” or “2” and then press [SET]. To shoot under these conditions: Select this option: You need to shoot twice to extract the subject. You need to shoot only once to extract the subject. If you select this option, you will not need to perform steps 7 and 8 of the procedure below. 2 1 The subject against a complex background The subject against a plain (no pattern) background 6. First, shoot an image that includes the subject you want to extract. € Shoot an image in which the subject is as large as possible. If you selected “2” for the “Number of Shots” setting, the images should include some easily identifiable reference point that you can use for later alignment in step 7 below. € If you selected “Moving Subject” the camera will record multiple subject images. Do not move the camera until shooting is complete. € If you selected “1” for the “Number of Shots” setting, this procedure is complete with this step. The camera will extract the subject and display it on the monitor screen. [. . . ] To shoot under these conditions 2 1 The subject against a complex background The subject against a plain (no pattern) background Select this option You need to shoot twice to extract the subject. You need to shoot only once to extract the subject. 11 Creating a Dynamic Photo Image Step 3: Have fun with Dynamic Photo. You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways. [. . . ]